Electrical Equipment, Components & Telecoms

The test device PN-20 is designed to test and evaluate the insulation resistance of non-energized high-voltage cable lines, insulators, couplings, motors and other equipment, as well as to test high-voltage arresters with a constant voltage of 0.5 to 20 kV. The device can be used by line personnel for operational control of the insulation condition before putting the equipment into operation after installation or repair.

The test device PN-20 is designed to test and evaluate the insulation resistance of non-energized high-voltage cable lines, insulators, couplings, motors and other equipment, as well as to test high-voltage arresters with a constant voltage of 0.5 to 20 kV. The device can be used by line personnel for operational control of the insulation condition before putting the equipment into operation after installation or repair.

Светодиодный модуль для паркового освещения. 

Светодиодный модуль состоит из печатной платы на алюминиевой подложки, клеммных колодок и светодиодов. Предназначен для офисного и промышленного освещения.

Measurement of resistance of grounding elements, metal connections, continuity of protective conductors by two and three-wire method.

Measurement of AC voltage (noise).

Megaohmmeter PSI-2510 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V. The presence of a magnetic holder allows you to fix the device on any metal surface.

Increased resistance measurement range up to 1 TΩ. The presence of a "hands-free" bag in the kit allows you to take measurements without taking out the device.

The device is designed to test residual current devices (RCDs) of AC, A types. The RCD type and its rated differential current are set manually in the device. All types of RCDs that do not have an operational amplifier with threshold values can be checked using the device offline, for example, when buying, without connecting voltage to the mains.

The device is powered by five 1.5 V AA batteries.

Operating temperature range from -15 to +55 0C.

Calibration interval 2 years.

Measurement of resistance of grounding elements, metal connections, continuity of protective conductors by two and three-wire method.

Measurement of AC voltage (noise).

Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.

Measurement of soil resistivity.

Measurement of AC voltage (noise).

The device is designed to test residual current devices (RCDs) of AC, A, B types. The RCD type and its rated differential current are set manually in the device. All types of RCDs that do not have an operational amplifier with threshold values can be checked using the device offline, for example, when buying, without connecting voltage to the mains. There is a function for measuring the resistance of the phase-zero loop from 0.4 to 60 ohms. PZO-510 is equipped with magnetic holders, which allows, if necessary, to quickly mount the device on steel surfaces, including those with paint and varnish coatings.

The instrument is powered by a NI-MH 6 V 2A/H battery or five 1.5 V AA batteries.

Operating temperature range from -15 to +55 0C.

Calibration interval 2 years.

The "Stalker 15-24" locator is a fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth of occurrence, followed by mapping.

The Stalker 15-24 locator is supplied with a GT-15 generator and a PT-24 receiver with a built-in GPS/GLONASS module

The "Stalker 15-14" locator is a fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth of occurrence, followed by mapping.

The Stalker 15-14 locator is supplied with a GT-15 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)

Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.

Measurement of soil resistivity.

Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).

Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).

AC current measurement without breaking the circuit.

Measurement of AC voltage (noise).

Locator "Stalker 15-12" is a convenient, reliable, easy-to-use device for searching underground communications

The delivery package for the Stalker 15-12 locator includes a GT-15 generator and a PT-12 receiver.

General features of the Stalker 15-12 locator:

Simple, intuitive communication search;
“RADIO” frequency (passive) for searching a route without a generator;
Frequency 33 kHz for contactless supply of the generator signal to the cable;
Non-contact transmission of a search signal using transmitting clamps KI-50;
Lightweight and compact generator GT-15.

The route finder "Stalker 80-14" (Li-Ion) is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.

The delivery package for the Stalker 80-14 locator includes a GT-80 generator and a PT-14 receiver (Li-Ion)

The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8

General features of the Stalker 80-14 locator:

• “Compass” function - schematic display of communications on the receiver display;
• tracking and coordinating location in a worldwide coordinate system;
• communication with a computer via Bluetooth, memory for 10,000 measurements;
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• the ability to use a smartphone instead of an external GPS/GLONASS module;
• for gas services, ECP frequencies are separately allocated for operation without a generator;
• the Stalker 80-14 locator will automatically display the depth and current strength (even in passive modes);
• remote control of the generator via the GSM network;
• frequency 33 kHz for contactless supply of the generator signal to communication;
• search for communications at a depth of up to 10 m and a distance of up to 10 km from the generator connection point;
• the presence of five operating frequencies and adjustable output power of the GT-80 generator (from 10 to 80 W). This generator is included in the set of Stalker defect detection systems: 80-24, 80-14, 80-12;
• PT-14 receiver menu in Russian and English.