Electrical Equipment, Components & Telecoms

The Stalker 80-24 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.

The delivery package for the Stalker 80-24 locator includes a GT-80 generator and a PT-24 receiver with a built-in GPS/GLONASS module

The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8

The educational film locator "Stalker" 80-24 with English subtitles can be viewed at https://youtu.be/GQ08twO60YM

General features of the Stalker 80-24 locator (built-in GPS/GLONASS module, Li-Ion)

• The “Compass” function is a schematic display of two communications on the receiver display;
• Finding the position of transmitting probes and television inspection cameras;
• Trace and coordinate location in a worldwide coordinate system;
• Built-in GPS/GLONASS module;
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• Possibility of using a smartphone instead of an external GPS/GLONASS module;
• Communication with a computer via Bluetooth, memory for 10,000 measurements;
• Remote control of the generator via GSM network;
• Frequency 33 kHz for contactless transmission of the generator signal into communication;
• for gas services, ECP frequencies are separately allocated for operation without a generator;
• the Stalker 80-24 locator will automatically display the depth and current strength (even in passive modes);
• search for communications at a depth of up to 10 m and a distance of up to 10 km from the generator connection point;
• the presence of five operating frequencies and adjustable output power of the GT-80 generator (from 10 to 80 W). This generator is included in the set of defect detection complexes Stalker: 80-14, 80-12;
• The PT-24 receiver menu is in Russian, English and Chinese.

The Stalker 75-14 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.

The delivery package for the Stalker 75-14 locator includes a GT-75 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)

The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8

General features of the Stalker 75-14 locator:

• “Compass” function - schematic display of communications on the receiver display;
• tracking and coordinating location in a worldwide coordinate system;
• communication with a computer via Bluetooth, memory for 10,000 measurements;
• built-in GPS/GLONASS module;
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• the ability to use a smartphone instead of an external GPS/GLONASS module for gas services, ECP frequencies are separately allocated for operation without a generator;
• the Stalker 80-14 locator will automatically display the depth and current strength (even in passive modes);
• remote control of the generator via the GSM network;
• frequency 33 kHz for contactless supply of the generator signal to communication;
• search for communications at a depth of up to 10 m and a distance of up to 10 km from the generator connection point;
• the presence of five operating frequencies and adjustable output power of the GT-75 generator (from 10 to 75 W). This generator is included in the set of Stalker defect detection systems: 75-24, 75-14, 75-12;
• PT-14 receiver menu in Russian and English.

The "Stalker 75-12" route finder is designed to determine the planned position and depth of communications, and survey areas of the area before carrying out excavation work.

The delivery package for the Stalker 75-12 locator includes a GT-75 generator and a PT-12 receiver.

General features of the Stalker 75-12 locator:

• A simple and understandable process for searching for underground communications;
• Search range - up to 10 km at a depth of up to 6 m;
• “RADIO” frequency (passive) for searching a route without a generator;
• Non-contact transmission of a search signal using transmitting clamps KI-50.

Locator "Stalker 15-14" - fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth, followed by mapping.

The delivery package for the Stalker 15-14 locator includes a GT-15 generator and a PT-14 receiver (Li-Ion).

The route finder "Stalker 80-14" (Li-Ion) is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.

The delivery package for the Stalker 80-14 locator includes a GT-80 generator and a PT-14 receiver (Li-Ion)

The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8

General features of the Stalker 80-14 locator:

• “Compass” function - schematic display of communications on the receiver display;
• tracking and coordinating location in a worldwide coordinate system;
• communication with a computer via Bluetooth, memory for 10,000 measurements;
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• the ability to use a smartphone instead of an external GPS/GLONASS module;
• for gas services, ECP frequencies are separately allocated for operation without a generator;
• the Stalker 80-14 locator will automatically display the depth and current strength (even in passive modes);
• remote control of the generator via the GSM network;
• frequency 33 kHz for contactless supply of the generator signal to communication;
• search for communications at a depth of up to 10 m and a distance of up to 10 km from the generator connection point;
• the presence of five operating frequencies and adjustable output power of the GT-80 generator (from 10 to 80 W). This generator is included in the set of Stalker defect detection systems: 80-24, 80-14, 80-12;
• PT-14 receiver menu in Russian and English.

Ball, self-leveling markers of the MP series are made in Russia.

Electronic markers are designed to mark the location of underground communications and are detected using Stalker marker detectors, as well as all types of marker detectors that have the appropriate search frequencies.

Detection depth: typical up to 1.6 m, maximum 1.8 m.

Operating temperature range from minus 30 to plus 55 ºС

External pressure, no more than 75 kPa

Estimated service life is 50 years.

The diameter of the sphere is no more than 110 mm, weight no more than 0.23 kg.

Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.

Measurement of soil resistivity.

Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).

Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).

AC current measurement without breaking the circuit.

Measurement of AC voltage (noise).

The PM-2 marker detector is designed to detect all types of passive electronic markers (including intelligent ones) used to identify underground communications.

Peculiarities:

Determination of the position of eight types of electronic markers:

• Cable TV,
• Gas supply,
• FOCL,
• Telephone communications,
• Sewerage,
• Water pipes,
• Electricity supply,
• Process water (general purpose);
• Scan mode: search simultaneously for up to four markers of various types;
• Determining the depth of the marker (depending on the type of marker up to 3.0 m);
• Memory for 10,000 points, wireless communication with PC;
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• Possibility of using a smartphone instead of an external GPS/GLONASS module

Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.

Measurement of soil resistivity.

Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).

Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).

AC current measurement without breaking the circuit.

Measurement of AC voltage (noise).

The PM-3 marker detector is designed to detect all types of passive electronic markers (including intelligent ones) used to identify underground communications.

The PM-3 marker detector allows you to record and read data from intelligent electronic markers of the 1400‑XR‑iD, 1200‑XR‑iD series.

You can get acquainted with the function of recording smart markers by following the link https://youtu.be/DgzZ-1EksYo

Peculiarities:

• Determining the position of eight types of electronic markers:

1. Cable TV,
2. Gas supply,
3. FOCL,
4. Telephone communications,
5. Sewerage,
6. Water pipes,
7. Electricity supply,

8. Process water (general purpose);

• Scan mode: search simultaneously for up to four markers of various types;
• Determining the depth of the marker (depending on the type of marker up to 3.0 m);
• Memory for 10,000 points, wireless communication with PC;
• The ability to record readings linked to coordinates received from an external GPS/GLONASS module and subsequently transmit them for viewing on a computer or device with Android OS.
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• Possibility of using a smartphone instead of an external GPS/GLONASS module