Electrical Equipment, Components & Telecoms

PIV-S-BP-38 Pneumatic distribution valve 3/2-NC, G 3/8'', 1.5...8 bar, pneumatic control G 1/8

EMD-VL – 0015 T ELHART frequency converter, vector series (1.5kW, 3.7A, 380V, vector and U/F control, removable remote control, integrated PID controller, RS-485 Modbus RTU), EMD-VL series

ASV-W-032-SS080-U Valve with pneumatic actuator, stainless steel, welded DIN 11850 series 2, 2/2 NC, DN 32, T=(-10...+180)C, Punder disk=(0...8 bar), pneumatic actuator 80 mm single-acting (port 1/4'')

Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.

Measurement of soil resistivity.

Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).

Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).

AC current measurement without breaking the circuit.

Measurement of AC voltage (noise).

ASV-W-040-SS080-U Valve with pneumatic actuator, stainless steel, welded DIN 11850 series 2, 2/2 NC, DN 40, T=(-10...+180)C, Punder disk=(0...8 bar), pneumatic actuator 80 mm single-acting (port 1/8'')

1901R-KBNF016-250-24DC Solenoid valve, brass, 1" (25 mm), 2/2 NC, -10°С...+80°С; 0.5…12 bar, 24V=, floating diaphragm design, moisture-proof coil (coil type 1, spare parts type A)

VBE-S-B-18.24DC 3/2-NC distribution valve, 1/8", direct acting, 0...8 bar, -5...+60°C, =24 V, coil type B, can be connected into blocks with a common pressure supply

ASV-W-015-SS050 Valve with pneumatic actuator, stainless steel, welded DIN 11850 series 2, 2/2 NC, DN 15, T=(-10...+180)C, Pover disk=(0...16 bar), pneumatic actuator 50 mm single-acting (port 1/8'')

The Stalker 75-14 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.

The delivery package for the Stalker 75-14 locator includes a GT-75 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)

The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8

General features of the Stalker 75-14 locator:

• “Compass” function - schematic display of communications on the receiver display;
• tracking and coordinating location in a worldwide coordinate system;
• communication with a computer via Bluetooth, memory for 10,000 measurements;
• built-in GPS/GLONASS module;
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• the ability to use a smartphone instead of an external GPS/GLONASS module for gas services, ECP frequencies are separately allocated for operation without a generator;
• the Stalker 80-14 locator will automatically display the depth and current strength (even in passive modes);
• remote control of the generator via the GSM network;
• frequency 33 kHz for contactless supply of the generator signal to communication;
• search for communications at a depth of up to 10 m and a distance of up to 10 km from the generator connection point;
• the presence of five operating frequencies and adjustable output power of the GT-75 generator (from 10 to 75 W). This generator is included in the set of Stalker defect detection systems: 75-24, 75-14, 75-12;
• PT-14 receiver menu in Russian and English.

Locator "Stalker 15-14" - fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth, followed by mapping.

The delivery package for the Stalker 15-14 locator includes a GT-15 generator and a PT-14 receiver (Li-Ion).

ASV-W-050-SS080-U-POS-V1B Shut-off and control valve with positioner, ASV-W-050-SS080-U valve, stainless steel, DIN11850s2 welding, 2/2 NC, DN 50, T=(-10...+180)C, P=0...8 bar, LPOS-S-V1B positioner, control 0/4...20mA, 0...10V, RS-485 Modbus-RTU, power supply=24V

PIV-S-AP-14 Pneumatic distribution valve 5/2, G 1/4'', 1.5...8 bar, pneumatic control G 1/8

The route finder "Stalker 80-14" (Li-Ion) is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.

The delivery package for the Stalker 80-14 locator includes a GT-80 generator and a PT-14 receiver (Li-Ion)

The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8

General features of the Stalker 80-14 locator:

• “Compass” function - schematic display of communications on the receiver display;
• tracking and coordinating location in a worldwide coordinate system;
• communication with a computer via Bluetooth, memory for 10,000 measurements;
• High-precision positioning (up to 1 cm) together with GPS RTK – PrinCe LT700H tablet;
• the ability to use a smartphone instead of an external GPS/GLONASS module;
• for gas services, ECP frequencies are separately allocated for operation without a generator;
• the Stalker 80-14 locator will automatically display the depth and current strength (even in passive modes);
• remote control of the generator via the GSM network;
• frequency 33 kHz for contactless supply of the generator signal to communication;
• search for communications at a depth of up to 10 m and a distance of up to 10 km from the generator connection point;
• the presence of five operating frequencies and adjustable output power of the GT-80 generator (from 10 to 80 W). This generator is included in the set of Stalker defect detection systems: 80-24, 80-14, 80-12;
• PT-14 receiver menu in Russian and English.

Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.

Measurement of soil resistivity.

Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).

Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).

AC current measurement without breaking the circuit.

Measurement of AC voltage (noise).