No items found matching the search criteria
£ – £
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
The Stalker 80-24 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 80-24 locator includes a GT-80 generator and a PT-24 receiver with a built-in GPS/GLONASS module
The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8
The educational film locator "Stalker" 80-24 with English subtitles can be viewed at https://youtu.be/GQ08twO60YM
General features of the Stalker 80-24 locator (built-in GPS/GLONASS module, Li-Ion)
Boring and surfacing complex PIONER RNK is designed to restore worn out holes. It allows not only boring, but also surfacing. The work is done in three stages:
1. Boring a worn hole to eliminate ellipse.
2. Surfacing to restore the metal layer.
3. Final boring to the required size.
The machine is mobile, so all work can be done at the location of the special equipment.
The PM-3 marker detector is designed to detect all types of passive electronic markers (including intelligent ones) used to identify underground communications.
The PM-3 marker detector allows you to record and read data from intelligent electronic markers of the 1400‑XR‑iD, 1200‑XR‑iD series.
You can get acquainted with the function of recording smart markers by following the link https://youtu.be/DgzZ-1EksYo
Peculiarities:
1. Cable TV,2. Gas supply,3. FOCL,4. Telephone communications,5. Sewerage,6. Water pipes,7. Electricity supply,
8. Process water (general purpose);
The route finder "Stalker 80-14" (Li-Ion) is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 80-14 locator includes a GT-80 generator and a PT-14 receiver (Li-Ion)
General features of the Stalker 80-14 locator:
Features of the Stalker 75-24 locator (built-in GPS/GLONASS module, Li-Ion)
The Stalker 75-14 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 75-14 locator includes a GT-75 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)
General features of the Stalker 75-14 locator:
The "Stalker 80-12" route finder is designed to determine the planned position and depth of communications, and survey areas of the area before carrying out excavation work.
The delivery package for the Stalker 80-12 locator includes a GT-80 generator and a PT-12 receiver. The principles of working with locators of the “Stalker” series can be found in educational films:
The "Stalker 15-24" locator is a fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth of occurrence, followed by mapping.
The Stalker 15-24 locator is supplied with a GT-15 generator and a PT-24 receiver with a built-in GPS/GLONASS module
Mobile surfacing machine Sarmat NK750 is used to repair worn holes. To eliminate ellipse, a boring machine is used, and after that, surfacing is performed. It is for this stage that a surfacing machine is required. Unlike the mobile machine Sarmat NK450, this machine performs not only internal surfacing, but also external one.
Minimum quantity for "Mobile surfacing machine SARMAT NK750" is 1.
The "Stalker 15-14" locator is a fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth of occurrence, followed by mapping.
The Stalker 15-14 locator is supplied with a GT-15 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)
The "Stalker 75-12" route finder is designed to determine the planned position and depth of communications, and survey areas of the area before carrying out excavation work.
The delivery package for the Stalker 75-12 locator includes a GT-75 generator and a PT-12 receiver.
General features of the Stalker 75-12 locator:
Locator "Stalker 15-14" - fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth, followed by mapping.
The delivery package for the Stalker 15-14 locator includes a GT-15 generator and a PT-14 receiver (Li-Ion).
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
The PM-2 marker detector is designed to detect all types of passive electronic markers (including intelligent ones) used to identify underground communications.
Determination of the position of eight types of electronic markers:
Мобильный расточный станок Пионер Авто - это усовершенствованная модель мобильного расточного станка Пионер. В отличие от последнего, Пионер Авто оснащен электроприводом, что существенно упрощает работу со станком.
Locator "Stalker 15-12" is a convenient, reliable, easy-to-use device for searching underground communications
The delivery package for the Stalker 15-12 locator includes a GT-15 generator and a PT-12 receiver.
General features of the Stalker 15-12 locator:
Simple, intuitive communication search;“RADIO” frequency (passive) for searching a route without a generator;Frequency 33 kHz for contactless supply of the generator signal to the cable;Non-contact transmission of a search signal using transmitting clamps KI-50;Lightweight and compact generator GT-15.
The test device PN-20 is designed to test and evaluate the insulation resistance of non-energized high-voltage cable lines, insulators, couplings, motors and other equipment, as well as to test high-voltage arresters with a constant voltage of 0.5 to 20 kV. The device can be used by line personnel for operational control of the insulation condition before putting the equipment into operation after installation or repair.
Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.
Measurement of soil resistivity.
Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).
Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).
AC current measurement without breaking the circuit.
Measurement of AC voltage (noise).
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.