Высота статуэтки 12 см, изготовлена и полистана
The height of the figurine is 23 cm
Material: Ceramic
Decor element for an office, room, office
The height of the figurine is 38 cm
The height of the figurine is 26 cm
A banana bag made of genuine leather is a small bag with a strap, thanks to which it can be worn over the shoulder, on the belt or hips. The bag has one main pocket, which is closed with a zipper, and an additional one on the rear outer wall.
The Stalker 75-14 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 75-14 locator includes a GT-75 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)
The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8
General features of the Stalker 75-14 locator:
Locator "Stalker 15-14" - fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth, followed by mapping.
The delivery package for the Stalker 15-14 locator includes a GT-15 generator and a PT-14 receiver (Li-Ion).
Ball, self-leveling markers of the MP series are made in Russia.
Electronic markers are designed to mark the location of underground communications and are detected using Stalker marker detectors, as well as all types of marker detectors that have the appropriate search frequencies.
Detection depth: typical up to 1.6 m, maximum 1.8 m.
Operating temperature range from minus 30 to plus 55 ºС
External pressure, no more than 75 kPa
Estimated service life is 50 years.
The diameter of the sphere is no more than 110 mm, weight no more than 0.23 kg.
The PM-3 marker detector is designed to detect all types of passive electronic markers (including intelligent ones) used to identify underground communications.
The PM-3 marker detector allows you to record and read data from intelligent electronic markers of the 1400‑XR‑iD, 1200‑XR‑iD series.
You can get acquainted with the function of recording smart markers by following the link https://youtu.be/DgzZ-1EksYo
Peculiarities:
1. Cable TV,2. Gas supply,3. FOCL,4. Telephone communications,5. Sewerage,6. Water pipes,7. Electricity supply,
8. Process water (general purpose);
The PM-2 marker detector is designed to detect all types of passive electronic markers (including intelligent ones) used to identify underground communications.
Determination of the position of eight types of electronic markers:
The Stalker 80-24 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 80-24 locator includes a GT-80 generator and a PT-24 receiver with a built-in GPS/GLONASS module
The educational film locator "Stalker" 80-24 with English subtitles can be viewed at https://youtu.be/GQ08twO60YM
General features of the Stalker 80-24 locator (built-in GPS/GLONASS module, Li-Ion)
The route finder "Stalker 80-14" (Li-Ion) is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 80-14 locator includes a GT-80 generator and a PT-14 receiver (Li-Ion)
General features of the Stalker 80-14 locator:
The "Stalker 80-12" route finder is designed to determine the planned position and depth of communications, and survey areas of the area before carrying out excavation work.
The delivery package for the Stalker 80-12 locator includes a GT-80 generator and a PT-12 receiver. The principles of working with locators of the “Stalker” series can be found in educational films:
Features of the Stalker 75-24 locator (built-in GPS/GLONASS module, Li-Ion)
Tap driver, designed for manual cutting of internal threads in holes and cylindrical parts. Suitable for clamping taps with M3-M12 threads.
The "Stalker 75-12" route finder is designed to determine the planned position and depth of communications, and survey areas of the area before carrying out excavation work.
The delivery package for the Stalker 75-12 locator includes a GT-75 generator and a PT-12 receiver.
General features of the Stalker 75-12 locator:
Locator "Stalker 15-12" is a convenient, reliable, easy-to-use device for searching underground communications
The delivery package for the Stalker 15-12 locator includes a GT-15 generator and a PT-12 receiver.
General features of the Stalker 15-12 locator:
Simple, intuitive communication search;“RADIO” frequency (passive) for searching a route without a generator;Frequency 33 kHz for contactless supply of the generator signal to the cable;Non-contact transmission of a search signal using transmitting clamps KI-50;Lightweight and compact generator GT-15.
BS Profi ball joint rebuild kit / extruder.We present a set for service station owners to effectively run their business. The kit allows you to quickly eliminate play in ball joints.BF Profi package• Extruder 1 pc.• Adapter fitting 3 pcs.• Air piston 32mm 1 piece• Pneumatic valve 1 pc.• Tubes 2 pcs.• Pyrometer 1 pc.• Polymer 10 pcs.• Gas burner 1 pc.• Tap holder 1 pc.• Tap 1 piece• Grease gun M8 3 pcs• Drill 7 mm 1 pc.• Tool case 1 pc.
Minimum quantity for "BS Profi ball joint restoration kit" is 1.
Consumable polymer using SJR technology for restoring ball joints or polymer for cars.Polymer sizes:•height 50 mm (+/- 1.5%)•diameter 15 mm (+/- 2 mm)Melting point: 182°CPolymer color white
Minimum quantity for "Consumable polymer SJR for rebuilding ball joints" is 1.
Minimum quantity for "Aroma diffuser" is 25.