We are manufacturers of tourist equipment, car parts and various additional equipment
Travel services of Udmurtia.
Main characteristics:
Size: 150 cm Maximum
Lifting height: 135 cm
Maximum load: 3000kg
Weight: 15KG
Material: cast iron
Minimum quantity for "Rack jack Farm Jack 150 cm 3 ton" is 1.
Excellent design, minimum weight, choice of placement of canisters in your or on your vehicle can be limited only by your fantasy! Flat canisters were designed in such a way that they can withstand loads of more than 400 kg. This gives extraordinary opportunities - the placement of a canister on the roofs of the trunk, and in the event of a hopeless situation of stuck car, they can be used as saddles.
Minimum quantity for "Canister flat "Extreme" plus 10 liters orange (real volume 8.6 liters)" is 1.
Minimum quantity for "Rack jack Hi-Lift Super X-Treme cast iron 120 cm" is 1.
Maximum permissible weight: 3000 kg
Minimum quantity for "Air jack AIR JACK lifting capacity up to 3 tons" is 1.
The synthetic rope is made of UHMWPE (Ultrahigh molecular weight polyethylene) - polyethylene (ultra high molecular weight) and is as strong as steel, yet very lightweight, wear-resistant and completely safe to use - even if it breaks under stress, severe injury Due to its softness and low weight, it will not cause damage to people and cars.
Minimum quantity for "Synthetic rope (kevlar) Ø14 mm for car winch, Rope" is 1.
Arch expanders with a length of 5 centimeters will fit SUVs with a length of wheels of 20-45 mm.Length of arch expanders and fastening tape 6/8 meters (to choose from)6 meters will be enough for: NIVA, UAZ Patriot/469/3151, GAZ 69, Niva Chevrolet, Renault Duster, LuAZ 969, Mitsubishi Pajero/ASX, Nissan Terrano, Great Wall Hover H2, Tagaz Tager, SuzuerOwners of Mitsubishi L200, Toyota Land Cruiser 100, Nissan Patrol, GW Safe are advised to pre-measure the length of the arches.Arch expanders are made of thermoplastic plastic. This material is also used to make shoe soles, which indicates its high wear resistance. Operating temperature range - 60 to + 80 ° С. Unlike PVC products, they do not break in the cold
Minimum quantity for "Car wheel Arch Expander 2 "" is 1.
Important!!! We recommend rinsing the canister before use, as there is a possibility of chips getting inside at the stage of product processing. Features of the multifunctional canister: - in addition to the main canister of 10 liters, the kit also includes a small yellow or black container with a volume of 0.35 liters. This will allow you to transport several types of liquid at once;
Minimum quantity for "Combined flat canister Extreme 10 liters 3 in 1 red" is 1.
Minimum quantity for "Collapsible vertical grill" is 1.
Minimum quantity for "Rack and pinion jack (hi-jack) PGT with cable" is 1.
Minimum quantity for "Rack jack Hi Lift X-Treme cast iron 150cm" is 1.
Minimum quantity for "Protective case 625x420x340 mm on wheels with telescopic handle" is 1.
Minimum quantity for "Device for lifting the car by the wheel with a Hi-Lift jack" is 1.
Minimum quantity for "Protective case 420х327х186 mm" is 1.
Characteristics:
Size 30x30 cmMaterial: steelMetal thickness: 4 mmWeight ~ 1.5 kgThere is a handleThe product is powder-painted, pre-sandblastedSuitable for jacks: Hi-Lift, T Max, Farm Jack, Ermak
Minimum quantity for "Platform for rack and pinion jack (hi-jack) "Platform"" is 1.
Minimum quantity for "Protective case 515х415х200 mm" is 1.
Main characteristics
External dimensions, mm: 975x430x165Internal dimensions, mm: 911x367x141Material: plasticBlack color
Minimum quantity for "Protective case 975x430x168 mm" is 1.
External dimensions, mm: 530x355x255Internal dimensions, mmr: 511x294x186Weight: 4.5kgMaterial: plasticBlack colorTwo layers of foam sealant
Minimum quantity for "Protective case 530x355x255 mm on wheels with telescopic handle" is 1.
Manufacturer RIF Weight, kg 10.8
Minimum quantity for "RIF bike rack in a square for a towbar for 2 bicycles" is 1.
Minimum quantity for "Rack jack Hi Lift cast iron + steel 150cm Code: HL-604" is 1.
Minimum quantity for "Protective case 330x280x120 mm" is 1.
Minimum quantity for "Protective case 512х410х150 mm" is 1.
Minimum quantity for "Protective case 430х380х154 mm" is 1.
Minimum quantity for "Protective case 300x248x212 mm" is 1.
Minimum quantity for "Protective case 1346x394x165 mm" is 1.
External dimensions, mm: 1133x422x165Internal dimensions, mm: 1067x367x144Material: plasticBlack colorWeight, 9 kg
Minimum quantity for "Protective case 1133х422х155 mm" is 1.