Electrical Equipment, Components & Telecoms

Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.

Measurement of soil resistivity.

Measurement of AC voltage (noise).

The device is designed to test residual current devices (RCDs) of AC, A, B types. The RCD type and its rated differential current are set manually in the device. All types of RCDs that do not have an operational amplifier with threshold values can be checked using the device offline, for example, when buying, without connecting voltage to the mains. There is a function for measuring the resistance of the phase-zero loop from 0.4 to 60 ohms. PZO-510 is equipped with magnetic holders, which allows, if necessary, to quickly mount the device on steel surfaces, including those with paint and varnish coatings.

The instrument is powered by a NI-MH 6 V 2A/H battery or five 1.5 V AA batteries.

Operating temperature range from -15 to +55 0C.

Calibration interval 2 years.

Measurement of resistance of grounding elements, metal connections, continuity of protective conductors by two and three-wire method.

Measurement of AC voltage (noise).

The device is designed to test residual current devices (RCDs) of AC, A types. The RCD type and its rated differential current are set manually in the device. All types of RCDs that do not have an operational amplifier with threshold values can be checked using the device offline, for example, when buying, without connecting voltage to the mains.

The device is powered by five 1.5 V AA batteries.

Operating temperature range from -15 to +55 0C.

Calibration interval 2 years.

Measurement of resistance of grounding elements, metal connections, continuity of protective conductors by two and three-wire method.

Measurement of AC voltage (noise).

Megaohmmeter PSI-2510 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V. The presence of a magnetic holder allows you to fix the device on any metal surface.

Increased resistance measurement range up to 1 TΩ. The presence of a "hands-free" bag in the kit allows you to take measurements without taking out the device.

The test device PN-20 is designed to test and evaluate the insulation resistance of non-energized high-voltage cable lines, insulators, couplings, motors and other equipment, as well as to test high-voltage arresters with a constant voltage of 0.5 to 20 kV. The device can be used by line personnel for operational control of the insulation condition before putting the equipment into operation after installation or repair.

The test device PN-20 is designed to test and evaluate the insulation resistance of non-energized high-voltage cable lines, insulators, couplings, motors and other equipment, as well as to test high-voltage arresters with a constant voltage of 0.5 to 20 kV. The device can be used by line personnel for operational control of the insulation condition before putting the equipment into operation after installation or repair.

Светодиодный модуль для паркового освещения. 

Светодиодный модуль состоит из печатной платы на алюминиевой подложки, клеммных колодок и светодиодов. Предназначен для офисного и промышленного освещения.

Megaohmmeter PSI-2500 is the best offer in its price category among megohmmeters with a test voltage of up to 2500 V. The device is designed to measure the insulation resistance of electrical circuits that are not energized and measure alternating voltage. After measuring for 1 minute, the device automatically calculates the absorption coefficient. The calibration interval is 2 years. The design of the device allows you to work at temperatures from -10 to +55 degrees. Power is supplied by 5 AA batteries.

Using the IFN-300 device, it is possible to measure the resistance of the "phase-zero", "phase-phase" loop and the transition resistance of contact connections. Using the data obtained, it is possible to identify malfunctions in group lines and carry out a set of measures in a short time to avoid serious accidents and fires.

Measurement of the "phase-zero" loop is carried out during acceptance testing of equipment at the request of controlling organizations or periodically - once every 3 years.
When measuring the loop resistance "phase-zero", "phase-phase", the device simultaneously measures the active, reactive and impedance of the loop, and also calculates the predicted short-circuit current without disabling the line protection. This is necessary to check the correctness of the set nominal value of the short-circuit protection element (circuit breaker or fuse) and determine the timely operation of this protection. The body of the device is equipped with magnetic holders, which allows, if necessary, to quickly mount the device on steel surfaces, including those with paint and varnish coatings.

Измерение полного сопротивления петли «фаза-нуль» и «фаза-фаза» с вычислением активного и реактивного сопротивлений.

Вычисление прогнозируемого тока короткого замыкания петли «фаза-нуль» и «фаза-фаза», приведенного к напряжениям сети 220/380 В, 230/400 В или 240/415 В.

Измерение параметров устройств защитного отключения (УЗО) общего и селективного типов, находящихся под напряжением, при следующих параметрах дифференциального тока:

- для типов АС, А и В на синусоидальном токе с возможностью установки начальной фазы тока 0 º и 180 º;

- для типов А и В на пульсирующем постоянном (однополупериодном) токе, на пульсирующем постоянном токе с углом задержки фазы тока 90 º и 135 º с возможностью установки полярности тока.

Измерение напряжения переменного тока.

Измерение напряжения прикосновения при протекании номинального дифференциального тока УЗО (требование ГОСТ IEC 61557-6-2013);

Измерение сопротивления постоянному току (металлосвязь).

Межповерочный интервал 2 года

LED module, 8 LEDs in a 3.5x3.5 housing - consists of a printed circuit board on an aluminum substrate, terminal blocks and LEDs, used as a light source as part of lighting equipment.

Megaohmmeter E6-32 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V.