No items found matching the search criteria
₽ – ₽
The "Stalker 15-14" locator is a fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth of occurrence, followed by mapping.
The Stalker 15-14 locator is supplied with a GT-15 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)
Measurement of resistance of grounding elements, metal connections, continuity of protective conductors by two and three-wire method.
Measurement of AC voltage (noise).
The device is designed to test residual current devices (RCDs) of AC, A types. The RCD type and its rated differential current are set manually in the device. All types of RCDs that do not have an operational amplifier with threshold values can be checked using the device offline, for example, when buying, without connecting voltage to the mains.
The device is powered by five 1.5 V AA batteries.
Operating temperature range from -15 to +55 0C.
Calibration interval 2 years.
Megaohmmeter PSI-2510 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V. The presence of a magnetic holder allows you to fix the device on any metal surface.
Increased resistance measurement range up to 1 TΩ. The presence of a "hands-free" bag in the kit allows you to take measurements without taking out the device.
Minimum quantity for "Stair lighting controller" is 2.
The test device PN-20 is designed to test and evaluate the insulation resistance of non-energized high-voltage cable lines, insulators, couplings, motors and other equipment, as well as to test high-voltage arresters with a constant voltage of 0.5 to 20 kV. The device can be used by line personnel for operational control of the insulation condition before putting the equipment into operation after installation or repair.
Megaohmmeter PSI-2500 is the best offer in its price category among megohmmeters with a test voltage of up to 2500 V. The device is designed to measure the insulation resistance of electrical circuits that are not energized and measure alternating voltage. After measuring for 1 minute, the device automatically calculates the absorption coefficient. The calibration interval is 2 years. The design of the device allows you to work at temperatures from -10 to +55 degrees. Power is supplied by 5 AA batteries.
Измерение полного сопротивления петли «фаза-нуль» и «фаза-фаза» с вычислением активного и реактивного сопротивлений.
Вычисление прогнозируемого тока короткого замыкания петли «фаза-нуль» и «фаза-фаза», приведенного к напряжениям сети 220/380 В, 230/400 В или 240/415 В.
Измерение параметров устройств защитного отключения (УЗО) общего и селективного типов, находящихся под напряжением, при следующих параметрах дифференциального тока:
- для типов АС, А и В на синусоидальном токе с возможностью установки начальной фазы тока 0 º и 180 º;
- для типов А и В на пульсирующем постоянном (однополупериодном) токе, на пульсирующем постоянном токе с углом задержки фазы тока 90 º и 135 º с возможностью установки полярности тока.
Измерение напряжения переменного тока.
Измерение напряжения прикосновения при протекании номинального дифференциального тока УЗО (требование ГОСТ IEC 61557-6-2013);
Измерение сопротивления постоянному току (металлосвязь).
Межповерочный интервал 2 года
Megaohmmeter E6-32 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V.
Using the IFN-300 device, it is possible to measure the resistance of the "phase-zero", "phase-phase" loop and the transition resistance of contact connections. Using the data obtained, it is possible to identify malfunctions in group lines and carry out a set of measures in a short time to avoid serious accidents and fires.
Measurement of the "phase-zero" loop is carried out during acceptance testing of equipment at the request of controlling organizations or periodically - once every 3 years.When measuring the loop resistance "phase-zero", "phase-phase", the device simultaneously measures the active, reactive and impedance of the loop, and also calculates the predicted short-circuit current without disabling the line protection. This is necessary to check the correctness of the set nominal value of the short-circuit protection element (circuit breaker or fuse) and determine the timely operation of this protection. The body of the device is equipped with magnetic holders, which allows, if necessary, to quickly mount the device on steel surfaces, including those with paint and varnish coatings.
Светодиодный модуль для паркового освещения.
Светодиодный модуль состоит из печатной платы на алюминиевой подложки, клеммных колодок и светодиодов. Предназначен для офисного и промышленного освещения.
Minimum quantity for "LED strip OctoLed" is 300.
Bactericidal recirculator IzhZdrav closed-type device for air purification and disinfection.
Decontamination efficiency up to 99.9%. The purifier is effective against all viruses, including influenza, rotavirus, smallpox, rabies, tuberculosis, ebola, SARS and others. In addition, spores of fungi, bacteria, mold and other microorganisms are destroyed.
It is intended for use in categories 4 and 5 of the list of premises of medical institutions and in categories 1-4 of the list of food industry enterprises providing the required level of bactericidal efficacy (%) and volumetric dose Hv (J / m³) for the sanitary indicative microorganism Staphylococcus Aureus. It is possible to use the device in the presence of people and animals.
Minimum quantity for "Bactericidal recirculator IzhZdrav" is 1.
LED module, 8 LEDs in a 3.5x3.5 housing - consists of a printed circuit board on an aluminum substrate, terminal blocks and LEDs, used as a light source as part of lighting equipment.
Minimum quantity for "LED module OctoLed 75.3535.0521" is 100.
Minimum quantity for "LED bar LedLine 8.118.0920" is 400.
