No items found matching the search criteria
₽ – ₽
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
The synthetic rope is made of UHMWPE （Ultrahigh molecular weight polyethylene) - polyethylene (ultra high molecular weight) and is as strong as steel, yet very lightweight, wear-resistant and completely safe to use - even if it breaks under stress, severe injury Due to its softness and low weight, it will not cause damage to people and cars.
Minimum quantity for "Synthetic rope (kevlar) Ø14 mm for car winch, Rope" is 1.
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.
Minimum quantity for "Rack jack Hi-Lift Super X-Treme cast iron 120 cm" is 1.
Sand catcher OVP-0,5/30. Volume 30l, wall thickness 5mm.
Защитное стекло для маски сварщика ( покровное стекло) , не является светофильтром!!! Если в нашем магазине вы не нашли нужный Вам размер стекла, обязательно напишите нам в раздел Вопросы. А мы изготовим и добавим этот размер на маркетплейс. Основная задача защитного стекла сварочной маски, защита светофильтра сварочной маски от абразива, брызг, искр и других внешних воздействий. Защитное стекло является быстросменным расходником. Мы изготавливаем как внешние защитные стекла к щитку сварщика, так и внутренние. Материалом является полностью прозрачный ПЭТ-лист толщиной 1 мм.
Minimum quantity for "Protective plate PET glass for welding helmet." is 3000.
Sand catcher OVP-0,5/40. Volume 40l, wall thickness 5mm.
Мобильный расточный станок Пионер Авто - это усовершенствованная модель мобильного расточного станка Пионер. В отличие от последнего, Пионер Авто оснащен электроприводом, что существенно упрощает работу со станком.
Maximum permissible weight: 3000 kg
Minimum quantity for "Air jack AIR JACK lifting capacity up to 3 tons" is 1.
"Ecolumen Arena" - LED spotlights for stadium illumination, have an aluminum, ventilated lightweight body, secondary optics ("LEDIL" lenses) and protection up to 6kV.
Gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles 02х12.
A gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles is a filling stand facility for filling cylinders in pallets, racks, and monoblocks with technical gases or mixtures of those, with air-operated drop-down protective screens with a control and parameter monitoring system.
Mobile Crosscutter Machine is designed for cutting off the same lengths of logs. It is used for any wood hardness - oak, hardbeam, larch, birch, etc. The length of the logs is adjustable. The double front stop ensures perpendicularity to the lateral face of the log.
Screw pumping units are designed for pumping liquids with both good fluidity and high viscosity liquids, liquids with gas plugs, liquids with solid (abrasive) inclusions in them, inhomogeneous media with the above-mentioned states of liquid and inclusions.
Ecolumen ALBL - industrial LED luminaires with secondary optics. Made of anodized aluminum with protection against voltage surges up to 420V and surge voltages up to 6000V.
Hacksaw (hand saw) steel series "Premium". It is intended for cross sawing up of wooden surfaces. It is made of high quality spring steel in accordance with the requirements of GOST 26215-84.
Blade length: 400mm
Tooth pitch: 4mm
Minimum quantity for "Handsaw with bicomponent hand-grip “PREMIUM” series" is 30.
Minimum quantity for "Rack and pinion jack (hi-jack) PGT with cable" is 1.
Automatic switchover unit RP-02х1А (ASU).
An automatic switchover unit is designed for automatic switchover of two independent gas sources with an operating pressure of up to 40.0 MPa in order to ensure continuous supply to consumers and to maintain the set operating pressure.
Important!!! We recommend rinsing the canister before use, as there is a possibility of chips getting inside at the stage of product processing. Features of the multifunctional canister: - in addition to the main canister of 10 liters, the kit also includes a small yellow or black container with a volume of 0.35 liters. This will allow you to transport several types of liquid at once;
Minimum quantity for "Combined flat canister Extreme 10 liters 3 in 1 red" is 1.
The aluminium profile for wardrobes is a reliable construction for many years!
We manufacture profiles for wardrobes
Aluminium polishing is the process of using abrasive materials to make the surface a smooth and shiny sheet or profile. It removes oxidation, corrosion or other contaminants that could damage the appearance of your aluminium products.
Grinding is an abrasive grinding process in which a grinding machine is used as a cutting tool, wheel or grinder. In our case, a machine.
Grinding is used to process workpieces that must exhibit high surface quality and high accuracy of shape and size. If your requirements for the profile are exactly the same, then there is no way without grinding.
Metal brushing process This metal brushing process occurs before anodizing the profile.
There are options with different pressure of the brushes on the metal and speed of passage. In some cases, we make several passes with the brushes to get the desired effect.
Features of powder coating We use American IPG paint and Russian paint PROLAK and BECKERS.
