We are manufacturers of tourist equipment, car parts and various additional equipment
Screw-cutting lathes
Lathes are the most numerous group of metal-cutting machines and are very diverse in size and type.
One of the most effective types of metal-cutting lathes is a screw-cutting machine, which is used for processing the ends of products, threading, turning conical, shaped and cylindrical surfaces, drilling and a number of other operations. Such machines can perform various types of turning operations, while ensuring high accuracy.
Minimum quantity for "Lathe-screw-cutting machine of 250AT model driven by frequency converter" is 1.
Main characteristics:
Size: 150 cm Maximum
Lifting height: 135 cm
Maximum load: 3000kg
Weight: 15KG
Material: cast iron
Minimum quantity for "Rack jack Farm Jack 150 cm 3 ton" is 1.
This is a plastic product that combines 10-liter canisters and a 0.35 liter container with the ability to separate them, which makes it possible to quickly and easily use the liquid you need.Especially useful for two-stroke engines for which you need to interfere with oil and gasoline. Gasoline is poured into a large canister, and oil is poured into a small tank. Dosing notches are present on the small capacity.At the top of the large canister there is a small pressure release valve.The uniqueness of the Extreme combination can is three in one:1. Extreme canister with a volume of 10 liters.2. oil can 0.35 l - 1 pc.3. Fill spout - 1 pc.4. The Extreme combined canister can also be used as a jack stand, which makes it possible to lift the High Jack car on weak soils, increasing the area of support on the ground, preventing the jack from falling through.
Minimum quantity for "Combined flat canister "Extreme" 10 liters "3 in 1" red" is 1.
Excellent design, minimum weight, choice of placement of canisters in your or on your vehicle can be limited only by your fantasy! Flat canisters were designed in such a way that they can withstand loads of more than 400 kg. This gives extraordinary opportunities - the placement of a canister on the roofs of the trunk, and in the event of a hopeless situation of stuck car, they can be used as saddles.
Minimum quantity for "Canister flat "Extreme" plus 10 liters orange (real volume 8.6 liters)" is 1.
The synthetic rope is made of UHMWPE (Ultrahigh molecular weight polyethylene) - polyethylene (ultra high molecular weight) and is as strong as steel, yet very lightweight, wear-resistant and completely safe to use - even if it breaks under stress, severe injury Due to its softness and low weight, it will not cause damage to people and cars.
Minimum quantity for "Synthetic rope (kevlar) Ø14 mm for car winch, Rope" is 1.
Minimum quantity for "Rack jack Hi-Lift Super X-Treme cast iron 120 cm" is 1.
Maximum permissible weight: 3000 kg
Minimum quantity for "Air jack AIR JACK lifting capacity up to 3 tons" is 1.
Minimum quantity for "Bicycle rack PGT in a square for a towbar for 3 bikes" is 1.
Minimum quantity for "Rack and pinion jack (hi-jack) PGT with cable" is 1.
Minimum quantity for "Collapsible vertical grill" is 1.
Important!!! We recommend rinsing the canister before use, as there is a possibility of chips getting inside at the stage of product processing. Features of the multifunctional canister: - in addition to the main canister of 10 liters, the kit also includes a small yellow or black container with a volume of 0.35 liters. This will allow you to transport several types of liquid at once;
Minimum quantity for "Combined flat canister Extreme 10 liters 3 in 1 red" is 1.
Minimum quantity for "Snow plow for Polaris RZR 1000 buggy" is 1.
Minimum quantity for "Protective case 625x420x340 mm on wheels with telescopic handle" is 1.
Minimum quantity for "Rack jack Hi Lift X-Treme cast iron 150cm" is 1.
Minimum quantity for "Widely universal milling machine 67K25PF1" is 1.
Minimum quantity for "Protective case 420х327х186 mm" is 1.
Characteristics:
Size 30x30 cmMaterial: steelMetal thickness: 4 mmWeight ~ 1.5 kgThere is a handleThe product is powder-painted, pre-sandblastedSuitable for jacks: Hi-Lift, T Max, Farm Jack, Ermak
Minimum quantity for "Platform for rack and pinion jack (hi-jack) "Platform"" is 1.
Main characteristics
External dimensions, mm: 975x430x165Internal dimensions, mm: 911x367x141Material: plasticBlack color
Minimum quantity for "Protective case 975x430x168 mm" is 1.
Minimum quantity for "Screw-cutting lathe 250 AT.CS" is 1.
Minimum quantity for "Device for lifting the car by the wheel with a Hi-Lift jack" is 1.
Minimum quantity for "Protective case 515х415х200 mm" is 1.
External dimensions, mm: 530x355x255Internal dimensions, mmr: 511x294x186Weight: 4.5kgMaterial: plasticBlack colorTwo layers of foam sealant
Minimum quantity for "Protective case 530x355x255 mm on wheels with telescopic handle" is 1.
Minimum quantity for "Rack jack Hi Lift cast iron + steel 150cm Code: HL-604" is 1.
Minimum quantity for "Protective case 330x280x120 mm" is 1.
Minimum quantity for "Protective case 1346x394x165 mm" is 1.