ALFA DESTROY Acidic foam cleaner for removing dirt after construction and renovation

Acidic foam cleaner for removing dirt after construction and renovation.

• Effectively removes cement residues and mortars based on it, gypsum stains, traces of grouts and building glue, water stone, salt deposits, efflorescence, rust stains and other mineral stains from any acid-resistant surfaces (granite, ceramic, tile and facing tiles, glass and etc)
• High cleaning speed
• Well soluble in water

APPLICATION:

Shake before use. Dilute the product with water, depending on the degree of contamination:

- 1% solution (10 ml of product per 990 ml of water) for cleaning after construction and repair work;

- 20% solution (200 ml of product in 800 ml of water) or use a concentrate to remove stubborn and old dirt.

Check the compatibility of the product with the surface to be treated on an inconspicuous area. Apply the resulting solution to the dirt, hold for 5-10 minutes, preventing the solution from drying on the surface, rinse with water. Repeat if necessary.

PROPERTIES:

Composition: deionized water (30% or more), a mixture of inorganic acids (more than 15%, but less than 30%), non-ionic surfactants (less than 5%), corrosion inhibitor (less than 5%).

Storage conditions: in a tightly closed original container at temperatures from -30 °C to +25 °C. The tool freezes. After defrosting and thorough mixing, it completely restores its properties.

Expiration date: 3 years from the date of manufacture

Country of manufacture: Russia

RECOMMENDATIONS:

Keep out of the reach of children. When diluted, add the concentrate to water. When working, use rubber gloves, goggles and overalls. Avoid swallowing, contact with skin or mucous membranes. In case of contact with skin or mucous membranes, rinse with plenty of running water, if necessary, seek medical advice. Do not mix with alkaline and chlorine-containing preparations. Do not use on aluminium, copper, cast iron, chrome, galvanized and enameled surfaces, as well as on marble.