DESTEP Floor rubber remover

• Completely biodegradable
• Has a high washing power
• Effective against heavy dirt
• Suitable for most surfaces
• Has a degreasing effect

APPLICATION:

Shake before use.
Before use, check the compatibility of the product with the surface on an inconspicuous area.
Depending on the complexity of the contamination and the type of contaminated surface, the agent can be used both in the form of an aqueous solution and in the form of a concentrate. The concentration of the agent is selected individually. The minimum concentration recommended for use is 5% (50 ml per 1 liter of water).
To remove traces of rubber from floor coverings, apply the agent or its solution to the contaminated surface using a sprayer (trigger) and hold for 5-15 minutes, for heavy and old dirt, the contact time with the surface should be increased to 20-30 minutes.
If necessary, use mechanical cleaning with brushes, sponges.
After treatment, it is recommended to thoroughly rinse the surface to be cleaned with water.

PROPERTIES:

Composition: deionized water (more than 30%), water-soluble solvents (more than 15%, but less than 30%), non-ionic surfactants (less than 5%), functional additives (less than 5%).
Storage conditions: store in a tightly closed original container at temperatures from -30 °C to +30 °C. The tool freezes. After defrosting and thorough mixing, it completely restores its properties.
pH (1%) - no more than 10.0-11.0
Shelf life: 2 years
Country of manufacture: Russia
TU 2380-004-68251848-2013

RECOMMENDATIONS:

Use personal protective equipment during work. In case of contact with skin or mucous membranes, rinse immediately with plenty of running water. Seek medical attention if necessary. Keep away from children.