Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.
Measurement of soil resistivity.
Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).
Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).
AC current measurement without breaking the circuit.
Measurement of AC voltage (noise).
Minimum quantity for "Towbar-mounted cargo platform" is 1.
Minimum quantity for "Kit for body lift 50 mm high for Mitsubishi Pajero 2 (5 doors)" is 1.
Minimum quantity for "Platform for rack and pinion jack (hi-jack) "Platform" with a cable" is 1.
Minimum quantity for "Bicycle rack PGT in a square for a towbar for 3 bikes" is 1.
Minimum quantity for "Snorkel Mitsubishi Pajero 2 (Pajero 2) 01/1990 - 07/1997" is 1.
Minimum quantity for "Snow plow for Polaris RZR 1000 buggy" is 1.
Minimum quantity for "Widely universal milling machine 67K25PF1" is 1.
Minimum quantity for "Screw-cutting lathe 250 AT.CS" is 1.
Minimum quantity for "Collapsible vertical grill" is 1.
Dynamic sling 10 t - 10 m, (for machines from 1.5 to 2.5 t) 8 t - 8 m, (for machines from 1.0 to 2.0 t) 16 t - 10 m (for machines from 3.0 and above)
Dynamic slings manufactured by PGT, Izhevsk.Dynamic sling (jerk), designed for optimal evacuation of a stuck car from mud, uneven road.Due to strong stretching during a jerk, and subsequent powerful compression, it is able to gently pull out a stuck car, without shock loads on the body.the best choice in terms of quality - price.
Minimum quantity for "Dynamic lanyard (jerk) for vehicles weighing up to 2500 kg, for towing, hitch, tow rope." is 1.
Arch expanders with a length of 5 centimeters will fit SUVs with a length of wheels of 20-45 mm.Length of arch expanders and fastening tape 6/8 meters (to choose from)6 meters will be enough for: NIVA, UAZ Patriot/469/3151, GAZ 69, Niva Chevrolet, Renault Duster, LuAZ 969, Mitsubishi Pajero/ASX, Nissan Terrano, Great Wall Hover H2, Tagaz Tager, SuzuerOwners of Mitsubishi L200, Toyota Land Cruiser 100, Nissan Patrol, GW Safe are advised to pre-measure the length of the arches.Arch expanders are made of thermoplastic plastic. This material is also used to make shoe soles, which indicates its high wear resistance. Operating temperature range - 60 to + 80 ° С. Unlike PVC products, they do not break in the cold
Minimum quantity for "Car wheel Arch Expander 2 "" is 1.
Excellent design, minimum weight, choice of placement of canisters in your or on your vehicle can be limited only by your fantasy! Flat canisters were designed in such a way that they can withstand loads of more than 400 kg. This gives extraordinary opportunities - the placement of a canister on the roofs of the trunk, and in the event of a hopeless situation of stuck car, they can be used as saddles.
Minimum quantity for "Canister flat "Extreme" plus 10 liters orange (real volume 8.6 liters)" is 1.
This is a plastic product that combines 10-liter canisters and a 0.35 liter container with the ability to separate them, which makes it possible to quickly and easily use the liquid you need.Especially useful for two-stroke engines for which you need to interfere with oil and gasoline. Gasoline is poured into a large canister, and oil is poured into a small tank. Dosing notches are present on the small capacity.At the top of the large canister there is a small pressure release valve.The uniqueness of the Extreme combination can is three in one:1. Extreme canister with a volume of 10 liters.2. oil can 0.35 l - 1 pc.3. Fill spout - 1 pc.4. The Extreme combined canister can also be used as a jack stand, which makes it possible to lift the High Jack car on weak soils, increasing the area of support on the ground, preventing the jack from falling through.
Minimum quantity for "Combined flat canister "Extreme" 10 liters "3 in 1" red" is 1.
Screw-cutting lathes
Lathes are the most numerous group of metal-cutting machines and are very diverse in size and type.
One of the most effective types of metal-cutting lathes is a screw-cutting machine, which is used for processing the ends of products, threading, turning conical, shaped and cylindrical surfaces, drilling and a number of other operations. Such machines can perform various types of turning operations, while ensuring high accuracy.
Minimum quantity for "Lathe-screw-cutting machine of 250AT model driven by frequency converter" is 1.
Main characteristics:
Size: 150 cm Maximum
Lifting height: 135 cm
Maximum load: 3000kg
Weight: 15KG
Material: cast iron
Minimum quantity for "Rack jack Farm Jack 150 cm 3 ton" is 1.
Characteristics:
Size 30x30 cmMaterial: steelMetal thickness: 4 mmWeight ~ 1.5 kgThere is a handleThe product is powder-painted, pre-sandblastedSuitable for jacks: Hi-Lift, T Max, Farm Jack, Ermak
Minimum quantity for "Platform for rack and pinion jack (hi-jack) "Platform"" is 1.
Minimum quantity for "Device for lifting the car by the wheel with a Hi-Lift jack" is 1.
Minimum quantity for "Rack and pinion jack (hi-jack) PGT with cable" is 1.
Maximum permissible weight: 3000 kg
Minimum quantity for "Air jack AIR JACK lifting capacity up to 3 tons" is 1.
Minimum quantity for "Rack jack Hi-Lift Super X-Treme cast iron 120 cm" is 1.
Minimum quantity for "Rack jack Hi Lift cast iron + steel 150cm Code: HL-604" is 1.
Minimum quantity for "Rack jack Hi Lift X-Treme cast iron 150cm" is 1.
Main characteristics
External dimensions, mm: 1133x422x165Internal dimensions, mm: 1067x367x144Material: plasticBlack colorWeight, 9 kg
Minimum quantity for "Protective case 1133х422х155 mm" is 1.
Minimum quantity for "Protective case 1346x394x165 mm" is 1.