Active ventilation kit: Nano-deflector ND160 with cuff, ventilation outlet 110 not insulated, for corrugated board C-21 mm, brown

Active ventilation kit: Nano-deflector ND160 with cuff, vent.outlet 110 not insulated, for corrugated board C-21 mm - serves to increase draft in the ventilation duct of a private or apartment building, in a cellar, garage, chicken coop, cowshed, stable, dressing room, steam room baths, external ventilation of the septic tank and storage rooms.

Comprises:

VV110 - Ventilation outlet (not insulated) 500 mm high, outer diameter 110 mm. It is used to ensure ventilation of the sewer system, to remove all odors and fumes generated during cooking. We recommend to apply on roofs of summer houses. It has a landing skirt on the bottom of the passage element and a thread on top for fixing the cap. It comes with self-tapping screws for fixing to the pass-through element.

PF21 - The PROF-21 ventilation pass-through is used on roofs made of profile sheet C-21 for the installation of ventilation pipes. The ventilation passage PROF-21 has a butyl rubber seal with an adhesive base on the bottom.
Principles of installation and operation of the product:
• With the help of a pattern, a vent is cut out in the roof. hole;
• The passage element is installed on top of the cut out hole, after which it is fixed with self-tapping screws to the roof;
• A vent is installed on the passage element. exit.
Material: Polypropylene
Dimensions (l * w * h): 330x260x160 mm. The dimensions of the lower mounting hole are 230 × 165 mm.

ND160 with collar - Nano deflector/Turbo deflector (Rotary deflector) with rubber collar for installation on pipes with a diameter of 100 to 125 mm. Made from ABS UV stabilized plastic. Powered by wind and does not consume electricity. Seat 160mm. Suitable for installation on pipes from 100 mm to 200 mm in diameter through adapters. Does not fade, does not corrode, operates completely silently, perfectly balanced, does not create vibrations in the exhaust pipe, does not allow blowing into the exhaust pipe, equipped with a level for easy installation. Service life not less than 10 years. The adapter is made of PVC. Installed on the pipe without effort. Does not lose its properties in heat and frost. It does not require special fasteners, as it is drilled with self-tapping screws, with which the nano-deflector itself is attached to the pipe.

Important! Nano deflector ND160 has RAL 7024 – Graphite Grey. The color is slightly different in tone.

Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.