Active ventilation kit: Turbo deflector TD160, vent. insulated exit H-700 height, for roofing corrugated board 35mm, brown

Active ventilation kit: Turbo deflector TD160, vent. insulated outlet H-700 height, for roofing corrugated board 35mm - serves to increase the draft in the ventilation duct of a private or apartment building, in the cellar, garage, chicken coop, cowshed, stable, dressing room, in the steam room of the bath, external ventilation of the septic tank and warehouses.

Comprises:

VV160 -700 - Insulated ventilation outlet 700 mm high, inner diameter 125 mm, outer diameter 160 mm. It is used to ensure ventilation of the sewer system or to remove all odors and vapors generated during cooking (kitchen hood). It is completed with a heater from polyurethane foam preventing formation of condensate. Thanks to the use of innovative materials, the ventilation outlet is not subject to icing even during prolonged frosts. We recommend to install on roofs with year-round habitation. It has a landing skirt on the bottom of the passage element and a thread on top for fixing the cap. It comes with self-tapping screws for fixing to the pass-through element.

PF35 - PROF-35 ventilation pass-through element is used on roofs made of profile sheet MP35 and C35 for installation of ventilation pipes. The PROF-35 ventilation duct has a butyl rubber seal with an adhesive base on the bottom.
Principles of installation and operation of the product:
• With the help of a pattern, a vent is cut out in the roof. hole;
• The passage element is installed on top of the cut out hole, after which it is fixed with self-tapping screws to the roof;
• A vent is installed on the passage element. exit.
Material: Polypropylene
Dimensions (l * w * h): 320x260x175 mm. Bottom mounting hole 230×180 mm.

TD160 - The D160 turbo deflector in galvanized painted metal consists of an active vane head mounted on a base with bearings that rotates under the action of the wind, removing air from the ventilation duct. The wind is the "motor". Prevents back draft. All parts are made of light metal, so the weakest wind is enough for the turbine to start working.

Important! The TD160 turbo deflector is RAL7024 - Graphite Grey. The color is slightly different in tone.

Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.