Active ventilation kit: Turbo deflector TD160, vent. outlet insulated with height H-700, for roofing corrugated board S-21 mm, black

Active ventilation kit: Turbo deflector TD160, vent. insulated outlet H-700 height, for roofing corrugated board C-21 mm - serves to increase draft in the ventilation duct of a private or apartment building, in a cellar, garage, chicken coop, barn, stable, dressing room, in the steam room of a bath, external ventilation of a septic tank and storage rooms .

Comprises:

VV160 -700 - Insulated ventilation outlet 700 mm high, inner diameter 125 mm, outer diameter 160 mm. It is used to ensure ventilation of the sewer system or to remove all odors and vapors generated during cooking (kitchen hood). It is completed with a heater from polyurethane foam preventing formation of condensate. Thanks to the use of innovative materials, the ventilation outlet is not subject to icing even during prolonged frosts. We recommend to install on roofs with year-round habitation. It has a landing skirt on the bottom of the passage element and a thread on top for fixing the cap. It comes with self-tapping screws for fixing to the pass-through element.

PF21 - The PROF-21 ventilation pass-through is used on roofs made of profile sheet C-21 for the installation of ventilation pipes. The ventilation passage PROF-21 has a butyl rubber seal with an adhesive base on the bottom.
Principles of installation and operation of the product:
• With the help of a pattern, a vent is cut out in the roof. hole;
• The passage element is installed on top of the cut out hole, after which it is fixed with self-tapping screws to the roof;
• A vent is installed on the passage element. exit.
Material: Polypropylene
Dimensions (l * w * h): 330x260x160 mm. The dimensions of the lower mounting hole are 230 × 165 mm.

TD160 - The D160 turbo deflector in galvanized painted metal consists of an active vane head mounted on a base with bearings that rotates under the action of the wind, removing air from the ventilation duct. The wind is the "motor". Prevents back draft. All parts are made of light metal, so the weakest wind is enough for the turbine to start working.

Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.