Nanex car cosmetics set

Nanex car cosmetics set. Protective water-repellent nano-coating for glasses

• Prevents the deposition of dust and dirt on the surface
• Does not change the light transmission and reflection of light, no rainbow effect
• Reduces the need for windshield wipers, especially at speeds above 60 km/h
• Reduces the consumption of anti-freeze fluid, as well as reduces wear on wipers and glass
• The coating is resistant to mechanical abrasion
• Glass treated with the composition is much easier to free from ice and snow
• The coating repels rain, dirt and splashes. Bitumen, vegetable resins, oil film, adhering insects, etc. on the glass. easily removed from the surface.

APPLICATION:
Surface treatment should be carried out at a temperature of 15-30 ° C and humidity up to 60%. The surface temperature should also be in the region of 15-30 °C. It is very important to thoroughly clean the surface from lime deposits, fats and oils, mechanical impurities before applying the composition. Residual contamination will reduce the life of the coating and the effectiveness of surface protection.
Surface preparation:
1) To remove general dirt, thoroughly wash the glass surface with effective detergents in accordance with the instructions for use. It is preferable to use a car shampoo for contactless washing or
car shampoo for hand washing without waxes and preservatives and use a sponge for cleaning.
2) To remove stubborn dirt, it is necessary to apply the Witrum degreasing agent included in the kit to the glass surface. Apply to the surface of the glass, not allowing the composition to dry, dry the surface with a clean paper towel, microfiber, wiping material. The average consumption of the product should be 50-100 ml/m2.
Nano coating application:
Shake the contents of each of the vials (K1 and K2) for 15 seconds. Mix 2 components in equal proportions (based on the area of glass for processing - 20 ml / m2) and shake thoroughly for 2 minutes (use the mixed composition within two hours). Apply the composition to the surface using a sprayer, a cloth moistened with the product, an applicator. Spread evenly over the entire surface until crystallization begins - the formation of white areas. The average consumption of the mixed agent should be 20-30 ml/m2. To sustain on a surface of 5-15 minutes, depending on humidity of air and air circulation in the room, before uniform drying. Spread the coating evenly over the entire surface area, first with a clean, dry microfiber cloth, then with a dampened clean cloth.

PROPERTIES:
Store at temperatures from -300C to +300C in the original packaging from the manufacturer. Freezing is allowed during transportation for a period not exceeding 5 days. If frozen, bring product to room temperature and carefully
mix. Deep freezing is allowed for 7 days.

Shelf life: 3 years from the date of manufacture, subject to storage rules

RECOMMENDATIONS:
During work, use personal protective equipment (glasses, gloves). In case of contact with skin or mucous membranes, rinse immediately with plenty of running water. Seek medical attention if necessary. Keep away from children.