SMART GRAPHEN CERAMIC Graphene protective nanocoating for car body

Graphene protective nanocoating for car body SMART GRAPHEN CERAMIC

Kit contents: Application fiber, protective applicator, ceramic 50 ml, z-card, instructions.

Benefits of using:
• increases resistance to chips and scratches by 30%;
• provides a powerful water and dirt repellent effect;
• provides the effect of "high gloss";
• guarantees resistance to an ultraviolet and protects a surface from burning out;
• ideal appearance - enhances the brightness of the color;
• corrosion resistance and resistance to chemicals;
• protects the surface from chemical and natural influences;
• Ideal for dark cars;
• Gives a satin finish to vehicles with a matte finish.
• Suitable for application to painted plastics.
• Coating service life - 1.5g

APPLICATION:
Before applying the composition, it is necessary to wash, polish the car and thoroughly degrease the surface.
• Shake the bottle (at least 30 seconds)
• Impregnate the applicator (15-20 drops for the first impregnation, then 5-10 drops per element, when processing the hood/roof - it is recommended to divide into 2 parts)
• Apply the composition to the element in an S-shaped motion (hood/roof divided into 2 parts)
• Distribute the composition by the method of crossing, covering the element in one direction without gaps, then in the opposite direction (recommended 2 repetitions)
• Keep the composition for at least 2 minutes on the element (at a temperature of +23 °C). The higher the temperature, the shorter the exposure
• Polish the composition with 3 different microfibers:
- First, evenly, without pressure, polish the composition over the surface of the element (matte and darkening may remain)
- With the second microfiber, remove the remnants of the composition and polish to a uniform gloss
- Wipe the car with the third microfiber, after complete application
• Leave the car for 18 hours for the composition to crystallize.

CHARACTERISTIC:
Dry residue of the product: 30-40%
Drop angle: 120°
Humidity: 40 to 70%
Crystallization: complete 7-10 days, primary 24 hours.
Storage temperature: from +16 °С to +25 °С.
Interlayer drying: 1 hour after application of the first element.
Coating thickness in 1 coat: ~ 0.15 µm
Drying by IR drying: 7 minutes each piece at 50°C.
Classic ceramic (50 ml) - designed for processing 6 cars in 1 layer.
The recommended amount is 2 layers.