Wall supply valve Norvind pro

The Norvind pro wall inlet valve creates natural forced ventilation in the room, which allows you to solve the problem of mold, stuffiness and condensation on the windows once and for all. Norvind pro ventilates instead of an open window, keeping the house warm.

The Norvind pro damper is mounted into the wall at a height of 2-2.2 m from the floor. The air flow from the street through the channel in the wall is drawn into the room. The filter integrated into the valve purifies the air and protects against noise, dust and insects.

The valve is equipped with a class G3 pre-filter that does not require special maintenance. The device works without electricity. The vent can be opened and closed, and the volume of incoming air can be adjusted by smoothly moving the damper. An important condition for the correct operation of the Norvind pro valve is the serviceability of the exhaust ducts in the kitchen and bathrooms.

The Norvind pro valve is designed specifically for construction companies. The diameter of the hole for the air duct is only 92 mm. At the same time, the valve provides an air flow of 32 m3/h at 10 Pa, which meets the requirements of SP 60.13330.2012 "Heating, ventilation and air conditioning".

We have provided the declared characteristics in terms of noise, heat and air volume with the smallest possible drilling diameter in order to reduce the cost and speed up the installation process.

Problems that Norvind pro solves:
  - sweating windows;
  - mold;
  - spirit.

Benefits of Norvind pro:
  - installed at any stage of construction;
  - compatible with all ventilation systems;
  - installation takes 40 minutes;
  - work in the temperature range from -40o to +80oC;
  - do not require special maintenance;
  - work without electricity.