No items found matching the search criteria
₽ – ₽
Minimum quantity for "Hacksaw handle" is 10.
Boring and surfacing complex PIONER RNK is designed to restore worn out holes. It allows not only boring, but also surfacing. The work is done in three stages:
1. Boring a worn hole to eliminate ellipse.
2. Surfacing to restore the metal layer.
3. Final boring to the required size.
The machine is mobile, so all work can be done at the location of the special equipment.
Компания Victar производит ЭПЧ-3 - самые мощные в мире ручные цепные электропилы и другое деревообрабатывающее оборудование.
Минипилорама ЭПЧ-3.МП для производства слэбов дуба, граба, лиственницы, распиловки капов (сувеля) на столешницы от 99 см до 200!!!
Компания «Victar» предлагает решения по внедрению средств механизации и автоматизации для действующих и вновь образующихся производств. Их внедрение позволит значительно облегчить ручной труд, снизить влияние человеческого фактора и повысить производительность.
Mobile Crosscutter Machine is designed for cutting off the same lengths of logs. It is used for any wood hardness - oak, hardbeam, larch, birch, etc. The length of the logs is adjustable. The double front stop ensures perpendicularity to the lateral face of the log.
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
Мобильный расточный станок Пионер Авто - это усовершенствованная модель мобильного расточного станка Пионер. В отличие от последнего, Пионер Авто оснащен электроприводом, что существенно упрощает работу со станком.
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
Mobile surfacing machine Sarmat NK750 is used to repair worn holes. To eliminate ellipse, a boring machine is used, and after that, surfacing is performed. It is for this stage that a surfacing machine is required. Unlike the mobile machine Sarmat NK450, this machine performs not only internal surfacing, but also external one.
Minimum quantity for "Mobile surfacing machine SARMAT NK750" is 1.
Screw pumping units are designed for pumping liquids with both good fluidity and high viscosity liquids, liquids with gas plugs, liquids with solid (abrasive) inclusions in them, inhomogeneous media with the above-mentioned states of liquid and inclusions.
Semi-submersible screw pumps type KMX V.They are designed to be installed on the neck of a container in order to pump the product contained in it.
• Nominal capacity:0.5 m3 / hour - 200 m3 / hour• Differential pressure:up to 4.5 MPa (45.0 kg / cm2)
The photo shows the packaging of the semi-submersible pump KMX for shipment to the Customer.☎ For any questions call 8 (3412) 326-466.
Minimum quantity for "Widely universal milling machine 67K25PF1" is 1.