Active ventilation kit: Nano-deflector ND160, vent. outlet insulated with height H-500, for roofing corrugated board 35mm, gray

Active ventilation kit: Nano-deflector ND160, vent. insulated outlet H-500 height, for roofing corrugated board 35mm - serves to increase the draft in the ventilation duct of a private or apartment building, in the cellar, garage, chicken coop, cowshed, stable, dressing room, in the steam room of the bath, external ventilation of the septic tank and warehouses.

Comprises:

VV160-500 - Insulated ventilation outlet 500 mm high, inner diameter 125 mm, outer diameter 160 mm is used to lead exhaust ventilation pipes to the roof. The inner tube is made of galvanized steel. Made from impact-resistant, weather-resistant ABS plastic with UV stabilization. Effectively contributes to the ventilation of any premises. The sealant provides thermal insulation and prevents freezing of the pipe even during prolonged frosts and the formation of condensate.
Advantages:
• not afraid of extreme weather conditions
• not afraid of falls and bumps
• does not rust or oxidize
• excellent appearance
• extended service life
• precise vertical adjustment

PF35 - PROF-35 ventilation pass-through element is used on roofs made of profile sheet MP35 and C35 for installation of ventilation pipes. The PROF-35 ventilation duct has a butyl rubber seal with an adhesive base on the bottom.
Principles of installation and operation of the product:
• With the help of a pattern, a vent is cut out in the roof. hole;
• The passage element is installed on top of the cut out hole, after which it is fixed with self-tapping screws to the roof;
• A vent is installed on the passage element. exit.
Material: Polypropylene
Dimensions (l*w*h): 320x260x175 mm, lower mounting hole 230x180 mm.

ND160 - Nano-deflector / Turbo-deflector RVT-160 (Rotary ventilation turbine 160 mm). Made from ABS UV stabilized plastic. Powered by wind and does not consume electricity. Seat 160mm. Suitable for installation on pipes from 100 mm to 200 mm in diameter through adapters. The nano-deflector does not fade, does not corrode, operates completely silently, is perfectly balanced, does not create vibrations in the chimney, does not allow blowing into the chimney, is equipped with a level for ease of installation. Service life not less than 10 years.

Important! Nano deflector ND160 has RAL 7024 – Graphite Grey. The color is slightly different in tone.
Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.