Ventilation kit: Cap D110, vent. outlet 110, for 35mm roofing sheet, gray

Ventilation kit: Cap D110, vent. exit 110, for roofing corrugated board 35mm - serves to create an exhaust hood in the ventilation duct of a private or apartment building, in the cellar, garage, chicken coop, cowshed, stable, dressing room, in the steam room of the bath, external ventilation of the septic tank and storage rooms.

Comprises:

VV110 - Ventilation outlet (not insulated) 500 mm high, outer diameter 110 mm. It is used to ensure ventilation of the sewer system, to remove all odors and fumes generated during cooking. We recommend to apply on roofs of summer houses. It has a landing skirt on the bottom of the passage element and a thread on top for fixing the cap. It comes with self-tapping screws for fixing to the pass-through element.

PF35 - PROF-35 ventilation pass-through element is used on roofs made of profile sheet MP35 and C35 for installation of ventilation pipes. The PROF-35 ventilation duct has a butyl rubber seal with an adhesive base on the bottom.
Principles of installation and operation of the product:
• With the help of a pattern, a vent is cut out in the roof. hole;
• The passage element is installed on top of the cut out hole, after which it is fixed with self-tapping screws to the roof;
• A vent is installed on the passage element. exit.
Material: Polypropylene
Dimensions (l*w*h): 320x260x175 mm, lower mounting hole 230x180 mm.

K110 - Ventilation hood D110 is used in conjunction with the ventilation outlet D110 H=500, has a corresponding mounting hole. The ventilation hood is used to give an aesthetic appearance to the ventilation outlets and prevent atmospheric precipitation from entering them.

Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.