Ventilation kit: Cap D110, vent. outlet 110, for pitched roofs, gray

Ventilation kit: Cap D110, vent. exit 110, for a pitched roof - serves to create an exhaust hood in the ventilation duct of a private or apartment building, in the cellar, garage, chicken coop, cowshed, stable, dressing room, in the steam room of the bath, external ventilation of the septic tank and storage rooms.

Comprises:

VV110 - Ventilation outlet (not insulated) 500 mm high, outer diameter 110 mm. It is used to ensure ventilation of the sewer system, to remove all odors and fumes generated during cooking. We recommend to apply on roofs of summer houses. It has a landing skirt on the bottom of the passage element and a thread on top for fixing the cap. It comes with self-tapping screws for fixing to the pass-through element.

S - The passage element for seam and finished roofing made of bituminous tiles serves as the basis for the installation of ventilation or sewer outlets. The pass-through element is used on pitched roofs with a slope of 5 degrees or more with a flat surface (flexible tiles, metal seam roofing, flat asbestos-cement sheets) directly onto the roofing. The dimensions of the through hole are 250*160 mm.

K110 - Ventilation hood D110 is used in conjunction with the ventilation outlet D110 H=500, has a corresponding mounting hole. The ventilation hood is used to give an aesthetic appearance to the ventilation outlets and prevent atmospheric precipitation from entering them.

Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.