Pass-through element Universal roofing, black

The Universal Roofing Pass-Through is used on roofs made of metal tiles or on other types of pitched roof coverings with any type of profile with a height of up to 70 mm (including natural tiles when using a drill for glass and ceramics, and self-tapping screws for bricks) to install ventilation pipes.

U - The UNIVERSAL passage element has a persistent vertical protrusion in the rear part of the product with notches, which allows its long adjustment of the use of a KTV valve with different heights of the roofing profile.

Principles of installation and operation of the product:

• Using a pattern, a vent is cut out in the roof. hole;
• The upper part of the rubber seal is cut off to fit the pipe diameter, but narrower by 10 mm;
• A rubber seal is installed above the vent cut into the roof. hole, fixed to the roof;
• The fastening protrusion of the passage element is cut off to the desired profile height;
• The passage element is installed on top of the seal, after which it is fixed to the roof;
• A vent is installed on the universal passage element for metal tiles. exit;
• The lower end of the vent is pulled through the attic opening of the seal. exit;
• An acetic-free sealant is used to seal the connection between the adapter and the rubber seal.

Material: Polypropylene
Dimensions (l*w*h): 346*520*167 mm.
Through hole: 240*160 mm.