No items found matching the search criteria
₽ – ₽
Асинхронные электродвигатели с короткозамкнутым ротором во взрывозащищенном исполнении АИМЛ
Boring and surfacing complex PIONER RNK is designed to restore worn out holes. It allows not only boring, but also surfacing. The work is done in three stages:
1. Boring a worn hole to eliminate ellipse.
2. Surfacing to restore the metal layer.
3. Final boring to the required size.
The machine is mobile, so all work can be done at the location of the special equipment.
Megaohmmeter PSI-2530 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V. The presence of a magnetic holder allows you to fix the device to any metal surface.
Using the IFN-300 device, it is possible to measure the resistance of the "phase-zero", "phase-phase" loop and the transition resistance of contact connections. Using the data obtained, it is possible to identify malfunctions in group lines and carry out a set of measures in a short time to avoid serious accidents and fires.
Measurement of the "phase-zero" loop is carried out during acceptance testing of equipment at the request of controlling organizations or periodically - once every 3 years.When measuring the loop resistance "phase-zero", "phase-phase", the device simultaneously measures the active, reactive and impedance of the loop, and also calculates the predicted short-circuit current without disabling the line protection. This is necessary to check the correctness of the set nominal value of the short-circuit protection element (circuit breaker or fuse) and determine the timely operation of this protection. The body of the device is equipped with magnetic holders, which allows, if necessary, to quickly mount the device on steel surfaces, including those with paint and varnish coatings.
Features Power supplies are built on a modern element base according to an inverter circuit with a linear regulator, which is based on a high-performance microcontroller - which made it possible to achieve the following parameters:
● Minimum pulsation level;
● High-contrast LCD display ;
● Internal high stability reference voltage source and precision ADC ;
● Interface availability.
Asynchronous electric motors with a squirrel-cage rotor in explosion-proof design AIML.
Explosion-proof asynchronous electric motors with a squirrel-cage rotor AIML
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
Мобильный расточный станок Пионер Авто - это усовершенствованная модель мобильного расточного станка Пионер. В отличие от последнего, Пионер Авто оснащен электроприводом, что существенно упрощает работу со станком.
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
Mobile surfacing machine Sarmat NK750 is used to repair worn holes. To eliminate ellipse, a boring machine is used, and after that, surfacing is performed. It is for this stage that a surfacing machine is required. Unlike the mobile machine Sarmat NK450, this machine performs not only internal surfacing, but also external one.
Minimum quantity for "Mobile surfacing machine SARMAT NK750" is 1.
Bactericidal recirculator IzhZdrav closed-type device for air purification and disinfection.
Decontamination efficiency up to 99.9%. The purifier is effective against all viruses, including influenza, rotavirus, smallpox, rabies, tuberculosis, ebola, SARS and others. In addition, spores of fungi, bacteria, mold and other microorganisms are destroyed.
It is intended for use in categories 4 and 5 of the list of premises of medical institutions and in categories 1-4 of the list of food industry enterprises providing the required level of bactericidal efficacy (%) and volumetric dose Hv (J / m³) for the sanitary indicative microorganism Staphylococcus Aureus. It is possible to use the device in the presence of people and animals.
Minimum quantity for "Bactericidal recirculator IzhZdrav" is 1.
