No items found matching the search criteria
元 – 元
Features Power supplies are built on a modern element base according to an inverter circuit with a linear regulator, which is based on a high-performance microcontroller - which made it possible to achieve the following parameters:
● Minimum pulsation level;
● High-contrast LCD display ;
● Internal high stability reference voltage source and precision ADC ;
● Interface availability.
Boring and surfacing complex PIONER RNK is designed to restore worn out holes. It allows not only boring, but also surfacing. The work is done in three stages:
1. Boring a worn hole to eliminate ellipse.
2. Surfacing to restore the metal layer.
3. Final boring to the required size.
The machine is mobile, so all work can be done at the location of the special equipment.
Mobile surfacing machine Sarmat NK750 is used to repair worn holes. To eliminate ellipse, a boring machine is used, and after that, surfacing is performed. It is for this stage that a surfacing machine is required. Unlike the mobile machine Sarmat NK450, this machine performs not only internal surfacing, but also external one.
Minimum quantity for "Mobile surfacing machine SARMAT NK750" is 1.
"Ecolumen AL" - industrial LED lamps. The body of the product is made of aluminum with anodized or polymer coating. The luminaires have a degree of protection IP67 and overvoltage protection up to 420V.
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
Асинхронные электродвигатели с короткозамкнутым ротором во взрывозащищенном исполнении АИМЛ
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.
Minimum quantity for "Recirculator DIDECO PREMIUM BLACK" is 3.
Megaohmmeter PSI-2530 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V. The presence of a magnetic holder allows you to fix the device to any metal surface.
Мобильный расточный станок Пионер Авто - это усовершенствованная модель мобильного расточного станка Пионер. В отличие от последнего, Пионер Авто оснащен электроприводом, что существенно упрощает работу со станком.
Ecolumen ALBL - industrial LED luminaires with secondary optics. Made of anodized aluminum with protection against voltage surges up to 420V and surge voltages up to 6000V.
Minimum quantity for "Recirculator DIDECO 60" is 30.
Minimum quantity for "Recirculator DIDECO ECO 120" is 30.
Minimum quantity for "Recirculator DIDECO Elegant 30 (silent)" is 30.
Minimum quantity for "Recirculator industrial DIDECO MAX HALL 1200" is 3.
Minimum quantity for "Recirculator DIDECO ECO 360" is 5.
Asynchronous electric motors with a squirrel-cage rotor in explosion-proof design AIML.
Explosion-proof asynchronous electric motors with a squirrel-cage rotor AIML
LED module, 8 LEDs in a 3.5x3.5 housing - consists of a printed circuit board on an aluminum substrate, terminal blocks and LEDs, used as a light source as part of lighting equipment.
Minimum quantity for "LED module OctoLed 75.3535.0521" is 100.
Minimum quantity for "LED bar LedLine 8.118.0920" is 400.
Светодиодный модуль для паркового освещения.
Светодиодный модуль состоит из печатной платы на алюминиевой подложки, клеммных колодок и светодиодов. Предназначен для офисного и промышленного освещения.
Minimum quantity for "LED strip OctoLed" is 300.
Using the IFN-300 device, it is possible to measure the resistance of the "phase-zero", "phase-phase" loop and the transition resistance of contact connections. Using the data obtained, it is possible to identify malfunctions in group lines and carry out a set of measures in a short time to avoid serious accidents and fires.
Measurement of the "phase-zero" loop is carried out during acceptance testing of equipment at the request of controlling organizations or periodically - once every 3 years.When measuring the loop resistance "phase-zero", "phase-phase", the device simultaneously measures the active, reactive and impedance of the loop, and also calculates the predicted short-circuit current without disabling the line protection. This is necessary to check the correctness of the set nominal value of the short-circuit protection element (circuit breaker or fuse) and determine the timely operation of this protection. The body of the device is equipped with magnetic holders, which allows, if necessary, to quickly mount the device on steel surfaces, including those with paint and varnish coatings.
Bactericidal recirculator IzhZdrav closed-type device for air purification and disinfection.
Decontamination efficiency up to 99.9%. The purifier is effective against all viruses, including influenza, rotavirus, smallpox, rabies, tuberculosis, ebola, SARS and others. In addition, spores of fungi, bacteria, mold and other microorganisms are destroyed.
It is intended for use in categories 4 and 5 of the list of premises of medical institutions and in categories 1-4 of the list of food industry enterprises providing the required level of bactericidal efficacy (%) and volumetric dose Hv (J / m³) for the sanitary indicative microorganism Staphylococcus Aureus. It is possible to use the device in the presence of people and animals.
Minimum quantity for "Bactericidal recirculator IzhZdrav" is 1.
Megaohmmeter E6-32 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V.
Измерение полного сопротивления петли «фаза-нуль» и «фаза-фаза» с вычислением активного и реактивного сопротивлений.
Вычисление прогнозируемого тока короткого замыкания петли «фаза-нуль» и «фаза-фаза», приведенного к напряжениям сети 220/380 В, 230/400 В или 240/415 В.
Измерение параметров устройств защитного отключения (УЗО) общего и селективного типов, находящихся под напряжением, при следующих параметрах дифференциального тока:
- для типов АС, А и В на синусоидальном токе с возможностью установки начальной фазы тока 0 º и 180 º;
- для типов А и В на пульсирующем постоянном (однополупериодном) токе, на пульсирующем постоянном токе с углом задержки фазы тока 90 º и 135 º с возможностью установки полярности тока.
Измерение напряжения переменного тока.
Измерение напряжения прикосновения при протекании номинального дифференциального тока УЗО (требование ГОСТ IEC 61557-6-2013);
Измерение сопротивления постоянному току (металлосвязь).
Межповерочный интервал 2 года
Minimum quantity for "Stair lighting controller" is 2.
The test device PN-20 is designed to test and evaluate the insulation resistance of non-energized high-voltage cable lines, insulators, couplings, motors and other equipment, as well as to test high-voltage arresters with a constant voltage of 0.5 to 20 kV. The device can be used by line personnel for operational control of the insulation condition before putting the equipment into operation after installation or repair.
Megaohmmeter PSI-2500 is the best offer in its price category among megohmmeters with a test voltage of up to 2500 V. The device is designed to measure the insulation resistance of electrical circuits that are not energized and measure alternating voltage. After measuring for 1 minute, the device automatically calculates the absorption coefficient. The calibration interval is 2 years. The design of the device allows you to work at temperatures from -10 to +55 degrees. Power is supplied by 5 AA batteries.
Megaohmmeter PSI-2510 is designed to measure the insulation resistance of electrical circuits that are not energized, and measure alternating voltage up to 700 V. The presence of a magnetic holder allows you to fix the device on any metal surface.
Increased resistance measurement range up to 1 TΩ. The presence of a "hands-free" bag in the kit allows you to take measurements without taking out the device.
Measurement of resistance of grounding elements, metal connections, continuity of protective conductors by two and three-wire method.
Measurement of AC voltage (noise).
The device is designed to test residual current devices (RCDs) of AC, A types. The RCD type and its rated differential current are set manually in the device. All types of RCDs that do not have an operational amplifier with threshold values can be checked using the device offline, for example, when buying, without connecting voltage to the mains.
The device is powered by five 1.5 V AA batteries.
Operating temperature range from -15 to +55 0C.
Calibration interval 2 years.
The "Stalker 15-24" locator is a fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth of occurrence, followed by mapping.
The Stalker 15-24 locator is supplied with a GT-15 generator and a PT-24 receiver with a built-in GPS/GLONASS module
The "Stalker 15-14" locator is a fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth of occurrence, followed by mapping.
The Stalker 15-14 locator is supplied with a GT-15 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)
The device is designed to test residual current devices (RCDs) of AC, A, B types. The RCD type and its rated differential current are set manually in the device. All types of RCDs that do not have an operational amplifier with threshold values can be checked using the device offline, for example, when buying, without connecting voltage to the mains. There is a function for measuring the resistance of the phase-zero loop from 0.4 to 60 ohms. PZO-510 is equipped with magnetic holders, which allows, if necessary, to quickly mount the device on steel surfaces, including those with paint and varnish coatings.
The instrument is powered by a NI-MH 6 V 2A/H battery or five 1.5 V AA batteries.
Measurement of the resistance of grounding elements, metal connections, continuity of protective conductors using a two-, three- or four-wire method.
Measurement of soil resistivity.
Locator "Stalker 15-12" is a convenient, reliable, easy-to-use device for searching underground communications
The delivery package for the Stalker 15-12 locator includes a GT-15 generator and a PT-12 receiver.
General features of the Stalker 15-12 locator:
Simple, intuitive communication search;“RADIO” frequency (passive) for searching a route without a generator;Frequency 33 kHz for contactless supply of the generator signal to the cable;Non-contact transmission of a search signal using transmitting clamps KI-50;Lightweight and compact generator GT-15.
The route finder "Stalker 80-14" (Li-Ion) is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 80-14 locator includes a GT-80 generator and a PT-14 receiver (Li-Ion)
The principles of operation of the Stalker series locators with high-precision GPS RTK tablet PrinCe LT700H can be found in the training film https://youtu.be/ixbdZwx_-n8
General features of the Stalker 80-14 locator:
The Stalker 80-24 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 80-24 locator includes a GT-80 generator and a PT-24 receiver with a built-in GPS/GLONASS module
The educational film locator "Stalker" 80-24 with English subtitles can be viewed at https://youtu.be/GQ08twO60YM
General features of the Stalker 80-24 locator (built-in GPS/GLONASS module, Li-Ion)
The "Stalker 80-12" route finder is designed to determine the planned position and depth of communications, and survey areas of the area before carrying out excavation work.
The delivery package for the Stalker 80-12 locator includes a GT-80 generator and a PT-12 receiver. The principles of working with locators of the “Stalker” series can be found in educational films:
Features of the Stalker 75-24 locator (built-in GPS/GLONASS module, Li-Ion)
The Stalker 75-14 route finder is designed to determine the planned position and depth of communications, places of damage to the insulation of pipelines and cables with further cartographic analysis.
The delivery package for the Stalker 75-14 locator includes a GT-75 generator and a PT-14 receiver with a built-in GPS/GLONASS module (Li-Ion)
General features of the Stalker 75-14 locator:
Measuring the resistance of a single grounding conductor in a multi-element grounding system without disconnecting it using measuring clamps (KTI-20/1 or KTI-20/2).
Measurement of the resistance of grounding elements without the use of auxiliary electrodes (GOST R 50571.16) using two clamps (KP-20/1 and KTI-20/1 or KP-20/1 and KTI-20/2).
AC current measurement without breaking the circuit.
The "Stalker 75-12" route finder is designed to determine the planned position and depth of communications, and survey areas of the area before carrying out excavation work.
The delivery package for the Stalker 75-12 locator includes a GT-75 generator and a PT-12 receiver.
General features of the Stalker 75-12 locator:
Minimum quantity for "Test box ANPC 687.228.001-04/01" is 20.
Locator "Stalker 15-14" - fast and accurate search for telephone, power cables and other communications, identification of coating defects and depth, followed by mapping.
The delivery package for the Stalker 15-14 locator includes a GT-15 generator and a PT-14 receiver (Li-Ion).