Active ventilation kit: Nano-deflector ND160, vent. outlet insulated with height H-700, for roofing corrugated board S-21 mm, gray

Grey
Write a review
List price: 12 326.00 
11 727.00 
You save: 599.00 ₽ (5%)
MERES
K-VV160-700/PF21/ND160-7015
In stock
+

Active ventilation kit: Nano-deflector ND160, vent. insulated outlet H-700 height, for roofing corrugated board C-21 mm - serves to increase draft in the ventilation duct of a private or apartment building, in a cellar, garage, chicken coop, barn, stable, dressing room, in the steam room of a bath, external ventilation of a septic tank and storage rooms .

Comprises:

VV160-700 - Insulated ventilation outlet 700 mm high, inner diameter 125 mm, outer diameter 160 mm. It is used to ensure ventilation of the sewer system or to remove all odors and vapors generated during cooking (kitchen hood). It is completed with a heater from polyurethane foam preventing formation of condensate. Thanks to the use of innovative materials, the ventilation outlet is not subject to icing even during prolonged frosts. We recommend to install on roofs with year-round habitation. It has a landing skirt on the bottom of the passage element and a thread on top for fixing the cap. It comes with self-tapping screws for fixing to the pass-through element.

PF21 - The PROF-21 ventilation pass-through is used on roofs made of profile sheet C-21 for the installation of ventilation pipes. The ventilation passage PROF-21 has a butyl rubber seal with an adhesive base on the bottom.
Principles of installation and operation of the product:
• With the help of a pattern, a vent is cut out in the roof. hole;
• The passage element is installed on top of the cut out hole, after which it is fixed with self-tapping screws to the roof;
• A vent is installed on the passage element. exit.
Material: Polypropylene
Dimensions (l * w * h): 330x260x160 mm. The dimensions of the lower mounting hole are 230 × 165 mm.

ND160 - Nano-deflector / Turbo-deflector RVT-160 (Rotary ventilation turbine 160 mm). Made from ABS UV stabilized plastic. Powered by wind and does not consume electricity. Seat 160mm. Suitable for installation on pipes from 100 mm to 200 mm in diameter through adapters. The nano-deflector does not fade, does not corrode, operates completely silently, is perfectly balanced, does not create vibrations in the chimney, does not allow blowing into the chimney, is equipped with a level for ease of installation. Service life not less than 10 years.

Important! Nano deflector ND160 has RAL 7024 – Graphite Grey. The color is slightly different in tone.
Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.

Color:
Grey
MERES

Solving complex production and technical problems in the field of heating and ventilation. Making high technology accessible.

- Accredited design engineers will solve the design issue for you (We work with the largest design institutes)

- A professional installation and maintenance service with many years of experience will help you perform construction and installation work, make commissioning, installation supervision.

Today we have experience in deliveries to the most remote regions of Russia and the CIS by land, air and sea transport.

No reviews found