Active ventilation kit: Turbo deflector TD160 OTs, vent. outlet insulated with height H-500, for roofing corrugated board S-21 mm, gray

Grey
Write a review
List price: 9 231.00 
9 122.00 
You save: 109.00 ₽ (1%)
MERES
K-VV160-500/PF21/TD160OC-7015
In stock
+

Active ventilation kit: Turbo deflector TD160 OTs, vent. insulated outlet H-500 height, for roofing corrugated board S-21 mm - serves to increase draft in the ventilation duct of a private or apartment building, in a cellar, garage, chicken coop, cowshed, stable, dressing room, in the steam room of a bath, external ventilation of a septic tank and warehouses .

Comprises:

VV160-500 - Insulated ventilation outlet 500 mm high, inner diameter 125 mm, outer diameter 160 mm is used to lead exhaust ventilation pipes to the roof. The inner tube is made of galvanized steel. Made from impact-resistant, weather-resistant ABS plastic with UV stabilization. Effectively contributes to the ventilation of any premises. The sealant provides thermal insulation and prevents freezing of the pipe even during prolonged frosts and the formation of condensate.
Advantages:
• not afraid of extreme weather conditions
• not afraid of falls and bumps
• does not rust or oxidize
• excellent appearance
• extended service life
• precise vertical adjustment

PF21 - The PROF-21 ventilation pass-through is used on roofs made of profile sheet C-21 for the installation of ventilation pipes. The ventilation passage PROF-21 has a butyl rubber seal with an adhesive base on the bottom.
Principles of installation and operation of the product:
• With the help of a pattern, a vent is cut out in the roof. hole;
• The passage element is installed on top of the cut out hole, after which it is fixed with self-tapping screws to the roof;
• A vent is installed on the passage element. exit.
Material: Polypropylene
Dimensions (l * w * h): 330x260x160 mm. The dimensions of the lower mounting hole are 230 × 165 mm.

TD160OC - D160 galvanized steel turbo deflector consists of an active vane head mounted on a base with bearings that rotates under the action of the wind, removing air from the ventilation duct. The wind is the "motor". Prevents back draft. All parts are made of light metal, so the weakest wind is enough for the turbine to start working.

Attention! The color of the kit may differ from the photo, also parts of the kit may have a different color shade within the declared color.
To prevent roof leaks with this product, we recommend that you additionally purchase Roof trap, black - Article: GZ, and roof sealant. The water seal ring prevents moisture from entering the insulation when the ventilation elements pass through the insulation pie.

Color:
Grey
MERES

Solving complex production and technical problems in the field of heating and ventilation. Making high technology accessible.

- Accredited design engineers will solve the design issue for you (We work with the largest design institutes)

- A professional installation and maintenance service with many years of experience will help you perform construction and installation work, make commissioning, installation supervision.

Today we have experience in deliveries to the most remote regions of Russia and the CIS by land, air and sea transport.

No reviews found