No items found matching the search criteria
₽ – ₽
Minimum quantity for "Сhain cutting machine TC2" is 1.
Компания «Victar» предлагает решения по внедрению средств механизации и автоматизации для действующих и вновь образующихся производств. Их внедрение позволит значительно облегчить ручной труд, снизить влияние человеческого фактора и повысить производительность.
Minimum quantity for "Widely universal milling machine 67K25PF1" is 1.
Semi-submersible screw pumps type KMX V.They are designed to be installed on the neck of a container in order to pump the product contained in it.
• Nominal capacity:0.5 m3 / hour - 200 m3 / hour• Differential pressure:up to 4.5 MPa (45.0 kg / cm2)
The photo shows the packaging of the semi-submersible pump KMX for shipment to the Customer.☎ For any questions call 8 (3412) 326-466.
Minimum quantity for "Thread protector NKT-V 73 (Internal)" is 50.
Minimum quantity for "Thread protector NKT-V 73 (External)" is 50.
Tap driver, designed for manual cutting of internal threads in holes and cylindrical parts. Suitable for clamping taps with M3-M12 threads.
The synthetic rope is made of UHMWPE （Ultrahigh molecular weight polyethylene) - polyethylene (ultra high molecular weight) and is as strong as steel, yet very lightweight, wear-resistant and completely safe to use - even if it breaks under stress, severe injury Due to its softness and low weight, it will not cause damage to people and cars.
Minimum quantity for "Synthetic rope (kevlar) Ø14 mm for car winch, Rope" is 1.
"Ecolumen Arena" - LED spotlights for stadium illumination, have an aluminum, ventilated lightweight body, secondary optics ("LEDIL" lenses) and protection up to 6kV.
Minimum quantity for "Snorkel corrugation (universal) D80 (26 cm to 80 cm)" is 1.
Minimum quantity for "Screw-cutting lathe 250 AT.CS" is 1.
The cone of the screw wood splitter "Carrot" is designed for splitting logs into logs that fit the size of the fireboxes of stoves, boilers, and fireplaces. This model is suitable for those whose diameter of splitting logs does not exceed 40 cm. Size: height 155mm, D 60mm, seat D 25mm. Thread pitch 6 mm. Seat depth 60 mm. Product material: steel 40X. The tip on the cone of the screw wood splitter is hardened. The thread on the nozzle is single-start, left-handed.
Minimum quantity for "Screw log splitter cone 60/25" is 1.
Minimum quantity for "Saw blade for a sawmill, diameter from 350 to 610 mm, in assortment" is 1.
Sand catcher OVP-0,5/50. Volume 50l, wall thickness 5mm.
Sand catcher OVP-0,5/40. Volume 40l, wall thickness 5mm.
Sand catcher OVP-0,5/30. Volume 30l, wall thickness 5mm.
Sand catcher OVP-0,5/25 . Volume 25l, wall thickness 5mm.
Minimum quantity for "Rack jack Hi-Lift Super X-Treme cast iron 120 cm" is 1.
Minimum quantity for "Rack jack Hi Lift X-Treme cast iron 150cm" is 1.
Minimum quantity for "Rack jack Hi Lift cast iron + steel 150cm Code: HL-604" is 1.
Main characteristics:
Size: 150 cm Maximum
Lifting height: 135 cm
Maximum load: 3000kg
Weight: 15KG
Material: cast iron
Minimum quantity for "Rack jack Farm Jack 150 cm 3 ton" is 1.
Minimum quantity for "Rack and pinion jack (hi-jack) PGT with cable" is 1.
Minimum quantity for "PVC suction device length 300 mm" is 1.
Minimum quantity for "Protector for tubing thread 73 (Еxternal)" is 50.
Minimum quantity for "Protector for tubing thread 73 (Internal)" is 50.
Защитное стекло для маски сварщика ( покровное стекло) , не является светофильтром!!! Если в нашем магазине вы не нашли нужный Вам размер стекла, обязательно напишите нам в раздел Вопросы. А мы изготовим и добавим этот размер на маркетплейс. Основная задача защитного стекла сварочной маски, защита светофильтра сварочной маски от абразива, брызг, искр и других внешних воздействий. Защитное стекло является быстросменным расходником. Мы изготавливаем как внешние защитные стекла к щитку сварщика, так и внутренние. Материалом является полностью прозрачный ПЭТ-лист толщиной 1 мм.
Minimum quantity for "Protective plate PET glass for welding helmet." is 3000.
Main characteristics
External dimensions, mm: 975x430x165Internal dimensions, mm: 911x367x141Material: plasticBlack color
Minimum quantity for "Protective case 975x430x168 mm" is 1.
Minimum quantity for "Protective case 625x420x340 mm on wheels with telescopic handle" is 1.
External dimensions, mm: 530x355x255Internal dimensions, mmr: 511x294x186Weight: 4.5kgMaterial: plasticBlack colorTwo layers of foam sealant
Minimum quantity for "Protective case 530x355x255 mm on wheels with telescopic handle" is 1.
Minimum quantity for "Protective case 515х415х200 mm" is 1.
Minimum quantity for "Protective case 512х410х150 mm" is 1.
Minimum quantity for "Protective case 430х380х154 mm" is 1.
Minimum quantity for "Protective case 420х327х186 mm" is 1.
Minimum quantity for "Protective case 330x280x120 mm" is 1.
Minimum quantity for "Protective case 300x248x212 mm" is 1.
Minimum quantity for "Protective case 246x175x77 mm" is 1.
Minimum quantity for "Protective case 210x167x90 mm" is 1.
Minimum quantity for "Protective case 1346x394x165 mm" is 1.
External dimensions, mm: 1133x422x165Internal dimensions, mm: 1067x367x144Material: plasticBlack colorWeight, 9 kg
Minimum quantity for "Protective case 1133х422х155 mm" is 1.
Компания Victar производит ЭПЧ-3 - самые мощные в мире ручные цепные электропилы и другое деревообрабатывающее оборудование.
Minimum quantity for "Power wheel arch extensions for VAZ NIVA 3 doors" is 1.
Characteristics:
Size 30x30 cmMaterial: steelMetal thickness: 4 mmWeight ~ 1.5 kgThere is a handleThe product is powder-painted, pre-sandblastedSuitable for jacks: Hi-Lift, T Max, Farm Jack, Ermak
Minimum quantity for "Platform for rack and pinion jack (hi-jack) "Platform"" is 1.
Mobile surfacing machine Sarmat NK750 is used to repair worn holes. To eliminate ellipse, a boring machine is used, and after that, surfacing is performed. It is for this stage that a surfacing machine is required. Unlike the mobile machine Sarmat NK450, this machine performs not only internal surfacing, but also external one.
Minimum quantity for "Mobile surfacing machine SARMAT NK750" is 1.
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
Mobile Crosscutter Machine is designed for cutting off the same lengths of logs. It is used for any wood hardness - oak, hardbeam, larch, birch, etc. The length of the logs is adjustable. The double front stop ensures perpendicularity to the lateral face of the log.
Мобильный расточный станок Пионер Авто - это усовершенствованная модель мобильного расточного станка Пионер. В отличие от последнего, Пионер Авто оснащен электроприводом, что существенно упрощает работу со станком.
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.
Минипилорама ЭПЧ-3.МП для производства слэбов дуба, граба, лиственницы, распиловки капов (сувеля) на столешницы от 99 см до 200!!!
The aluminium profile for wardrobes is a reliable construction for many years!
We manufacture profiles for wardrobes
Aluminium polishing is the process of using abrasive materials to make the surface a smooth and shiny sheet or profile. It removes oxidation, corrosion or other contaminants that could damage the appearance of your aluminium products.
Grinding is an abrasive grinding process in which a grinding machine is used as a cutting tool, wheel or grinder. In our case, a machine.
Grinding is used to process workpieces that must exhibit high surface quality and high accuracy of shape and size. If your requirements for the profile are exactly the same, then there is no way without grinding.
Metal brushing process This metal brushing process occurs before anodizing the profile.
There are options with different pressure of the brushes on the metal and speed of passage. In some cases, we make several passes with the brushes to get the desired effect.
Features of powder coating We use American IPG paint and Russian paint PROLAK and BECKERS.
Low-pressure check valve. 200 bar.
Minimum quantity for "Line for the production of fiberglass reinforcement "Rebars"" is 1.
Minimum quantity for "Line for the production of fiberglass mesh "KSP"" is 1.
Ecolumen ALBL - industrial LED luminaires with secondary optics. Made of anodized aluminum with protection against voltage surges up to 420V and surge voltages up to 6000V.
Screw-cutting lathes
Lathes are the most numerous group of metal-cutting machines and are very diverse in size and type.
One of the most effective types of metal-cutting lathes is a screw-cutting machine, which is used for processing the ends of products, threading, turning conical, shaped and cylindrical surfaces, drilling and a number of other operations. Such machines can perform various types of turning operations, while ensuring high accuracy.
Minimum quantity for "Lathe-screw-cutting machine of 250AT model driven by frequency converter" is 1.
The kit includes:
Spacers (material - caprolon) Ø70mm, height 50mm: 12 pcs.Bolts (strength class at least 8.8) Ø12mm x 140mm: 10 pcs.Bolts (strength class at least 8.8) Ø12mm x 170mm: 2 pcs.Washers: 24 pcs.Nuts: 12 pcs.
Minimum quantity for "Kit for lifting a body with a height of 50 mm for the car Mitsubishi Pajero 2 (5 doors)" is 1.
