No items found matching the search criteria
₽ – ₽
Компания Victar производит ЭПЧ-3 - самые мощные в мире ручные цепные электропилы и другое деревообрабатывающее оборудование.
The blade of the forged axe "Viking-Souvenir" is made of strong spring steel of the 60G grade. It becomes solid due to forging and special heat treating. The handle is made of valuable wood: nut wood, ash, oak. We cover the axe with chromium, and then engrave.
Minimum quantity for "Axe «Viking-Souvenir»" is 1.
Boring and surfacing complex PIONER RNK is designed to restore worn out holes. It allows not only boring, but also surfacing. The work is done in three stages:
1. Boring a worn hole to eliminate ellipse.
2. Surfacing to restore the metal layer.
3. Final boring to the required size.
The machine is mobile, so all work can be done at the location of the special equipment.
Main characteristics:
Size: 150 cm Maximum
Lifting height: 135 cm
Maximum load: 3000kg
Weight: 15KG
Material: cast iron
Minimum quantity for "Rack jack Farm Jack 150 cm 3 ton" is 1.
Screw-cutting lathes
Lathes are the most numerous group of metal-cutting machines and are very diverse in size and type.
One of the most effective types of metal-cutting lathes is a screw-cutting machine, which is used for processing the ends of products, threading, turning conical, shaped and cylindrical surfaces, drilling and a number of other operations. Such machines can perform various types of turning operations, while ensuring high accuracy.
Minimum quantity for "Lathe-screw-cutting machine of 250AT model driven by frequency converter" is 1.
Минипилорама ЭПЧ-3.МП для производства слэбов дуба, граба, лиственницы, распиловки капов (сувеля) на столешницы от 99 см до 200!!!
Gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles 04х12.
A gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles is a filling stand facility for filling cylinders in pallets, racks, and monoblocks with technical gases or mixtures of those, with air-operated drop-down protective screens with a control and parameter monitoring system.
Sand catcher OVP-0,5/50. Volume 50l, wall thickness 5mm.
Semi-submersible screw pumps type KMX V.They are designed to be installed on the neck of a container in order to pump the product contained in it.
• Nominal capacity:0.5 m3 / hour - 200 m3 / hour• Differential pressure:up to 4.5 MPa (45.0 kg / cm2)
The photo shows the packaging of the semi-submersible pump KMX for shipment to the Customer.☎ For any questions call 8 (3412) 326-466.
Mobile surfacing machine Sarmat NK750 is used to repair worn holes. To eliminate ellipse, a boring machine is used, and after that, surfacing is performed. It is for this stage that a surfacing machine is required. Unlike the mobile machine Sarmat NK450, this machine performs not only internal surfacing, but also external one.
Minimum quantity for "Mobile surfacing machine SARMAT NK750" is 1.
Sand catcher OVP-0,5/25 . Volume 25l, wall thickness 5mm.
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
The synthetic rope is made of UHMWPE (Ultrahigh molecular weight polyethylene) - polyethylene (ultra high molecular weight) and is as strong as steel, yet very lightweight, wear-resistant and completely safe to use - even if it breaks under stress, severe injury Due to its softness and low weight, it will not cause damage to people and cars.
Minimum quantity for "Synthetic rope (kevlar) Ø14 mm for car winch, Rope" is 1.
Minimum quantity for "Rack jack Hi-Lift Super X-Treme cast iron 120 cm" is 1.
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.
Sand catcher OVP-0,5/30. Volume 30l, wall thickness 5mm.
Sand catcher OVP-0,5/40. Volume 40l, wall thickness 5mm.
Maximum permissible weight: 3000 kg
Minimum quantity for "Air jack AIR JACK lifting capacity up to 3 tons" is 1.
"Ecolumen Arena" - LED spotlights for stadium illumination, have an aluminum, ventilated lightweight body, secondary optics ("LEDIL" lenses) and protection up to 6kV.
Minimum quantity for "Snorkel corrugation (universal) D80 (26 cm to 80 cm)" is 1.
Защитное стекло для маски сварщика ( покровное стекло) , не является светофильтром!!! Если в нашем магазине вы не нашли нужный Вам размер стекла, обязательно напишите нам в раздел Вопросы. А мы изготовим и добавим этот размер на маркетплейс. Основная задача защитного стекла сварочной маски, защита светофильтра сварочной маски от абразива, брызг, искр и других внешних воздействий. Защитное стекло является быстросменным расходником. Мы изготавливаем как внешние защитные стекла к щитку сварщика, так и внутренние. Материалом является полностью прозрачный ПЭТ-лист толщиной 1 мм.
Minimum quantity for "Protective plate PET glass for welding helmet." is 3000.
Gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles 02х12.