No items found matching the search criteria
₽ – ₽
Компания Victar производит ЭПЧ-3 - самые мощные в мире ручные цепные электропилы и другое деревообрабатывающее оборудование.
The blade of the forged axe "Viking-Souvenir" is made of strong spring steel of the 60G grade. It becomes solid due to forging and special heat treating. The handle is made of valuable wood: nut wood, ash, oak. We cover the axe with chromium, and then engrave.
Minimum quantity for "Axe «Viking-Souvenir»" is 1.
Main characteristics:
Size: 150 cm Maximum
Lifting height: 135 cm
Maximum load: 3000kg
Weight: 15KG
Material: cast iron
Minimum quantity for "Rack jack Farm Jack 150 cm 3 ton" is 1.
Boring and surfacing complex PIONER RNK is designed to restore worn out holes. It allows not only boring, but also surfacing. The work is done in three stages:
1. Boring a worn hole to eliminate ellipse.
2. Surfacing to restore the metal layer.
3. Final boring to the required size.
The machine is mobile, so all work can be done at the location of the special equipment.
Gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles 04х12.
A gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles is a filling stand facility for filling cylinders in pallets, racks, and monoblocks with technical gases or mixtures of those, with air-operated drop-down protective screens with a control and parameter monitoring system.
Минипилорама ЭПЧ-3.МП для производства слэбов дуба, граба, лиственницы, распиловки капов (сувеля) на столешницы от 99 см до 200!!!
Screw-cutting lathes
Lathes are the most numerous group of metal-cutting machines and are very diverse in size and type.
One of the most effective types of metal-cutting lathes is a screw-cutting machine, which is used for processing the ends of products, threading, turning conical, shaped and cylindrical surfaces, drilling and a number of other operations. Such machines can perform various types of turning operations, while ensuring high accuracy.
Minimum quantity for "Lathe-screw-cutting machine of 250AT model driven by frequency converter" is 1.
Sand catcher OVP-0,5/50. Volume 50l, wall thickness 5mm.
Semi-submersible screw pumps type KMX V.They are designed to be installed on the neck of a container in order to pump the product contained in it.
• Nominal capacity:0.5 m3 / hour - 200 m3 / hour• Differential pressure:up to 4.5 MPa (45.0 kg / cm2)
The photo shows the packaging of the semi-submersible pump KMX for shipment to the Customer.☎ For any questions call 8 (3412) 326-466.
Mobile surfacing machine Sarmat NK750 is used to repair worn holes. To eliminate ellipse, a boring machine is used, and after that, surfacing is performed. It is for this stage that a surfacing machine is required. Unlike the mobile machine Sarmat NK450, this machine performs not only internal surfacing, but also external one.
Minimum quantity for "Mobile surfacing machine SARMAT NK750" is 1.
Sand catcher OVP-0,5/25 . Volume 25l, wall thickness 5mm.
Gas and mixture filling system for Cylinder assemblies and Gas Cylinder Bundles 02х12.
Hacksaw (hand saw) steel series "Premium". It is intended for cross sawing up of wooden surfaces. It is made of high quality spring steel in accordance with the requirements of GOST 26215-84.
Blade length: 400mm
Tooth pitch: 4mm
Minimum quantity for "Handsaw with bicomponent hand-grip “PREMIUM” series" is 30.
Mobile machine PIONER 2 is used for boring holes with a diameter of 46 to 400 mm and a depth of 500 mm in 1 pass. For further boring, it is enough to move the cutter.
Minimum quantity for "Snorkel corrugation (universal) D80 (26 cm to 80 cm)" is 1.
Mobile surfacing machine Sarmat NK450 is used to repair worn holes. The hole needs to be bored first to eliminate ellipse. After that, the surfacing machine can be used. For the final restoration of the original diameter, boring is again used.
Automatic switchover unit RP-02х1А (ASU).
An automatic switchover unit is designed for automatic switchover of two independent gas sources with an operating pressure of up to 40.0 MPa in order to ensure continuous supply to consumers and to maintain the set operating pressure.
Sand catcher OVP-0,5/30. Volume 30l, wall thickness 5mm.
Minimum quantity for "Rack jack Hi-Lift Super X-Treme cast iron 120 cm" is 1.
Sand catcher OVP-0,5/40. Volume 40l, wall thickness 5mm.
Mobile Crosscutter Machine is designed for cutting off the same lengths of logs. It is used for any wood hardness - oak, hardbeam, larch, birch, etc. The length of the logs is adjustable. The double front stop ensures perpendicularity to the lateral face of the log.
The mobile boring machine PIONER allows you to repair equipment without transporting it to the repair shop. Designed to restore worn-out holes in special equipment. Mobile machines are used in many areas, from agriculture and road construction equipment to sea and river transport. Their use saves time and money on equipment repairs.
"Ecolumen Arena" - LED spotlights for stadium illumination, have an aluminum, ventilated lightweight body, secondary optics ("LEDIL" lenses) and protection up to 6kV.
Maximum permissible weight: 3000 kg
Minimum quantity for "Air jack AIR JACK lifting capacity up to 3 tons" is 1.
Fat catcher OV-0,5/50, volume 50L, wall thickness 5mm.
Screw pumping units are designed for pumping liquids with both good fluidity and high viscosity liquids, liquids with gas plugs, liquids with solid (abrasive) inclusions in them, inhomogeneous media with the above-mentioned states of liquid and inclusions.
Компания «Victar» предлагает решения по внедрению средств механизации и автоматизации для действующих и вновь образующихся производств. Их внедрение позволит значительно облегчить ручной труд, снизить влияние человеческого фактора и повысить производительность.
Important!!! We recommend rinsing the canister before use, as there is a possibility of chips getting inside at the stage of product processing. Features of the multifunctional canister: - in addition to the main canister of 10 liters, the kit also includes a small yellow or black container with a volume of 0.35 liters. This will allow you to transport several types of liquid at once;
Minimum quantity for "Combined flat canister Extreme 10 liters 3 in 1 red" is 1.
Мобильный расточный станок Пионер Авто - это усовершенствованная модель мобильного расточного станка Пионер. В отличие от последнего, Пионер Авто оснащен электроприводом, что существенно упрощает работу со станком.
Ecolumen ALBL - industrial LED luminaires with secondary optics. Made of anodized aluminum with protection against voltage surges up to 420V and surge voltages up to 6000V.
Fat catcher OV-0,5/40, volume 40L, wall thickness 5мм.
Fat catcher OV-0,5/25 volume 25L, wall thickness 5мм.
Minimum quantity for "Screw-cutting lathe 250 AT.CS" is 1.
Minimum quantity for "Rack and pinion jack (hi-jack) PGT with cable" is 1.
The aluminium profile for wardrobes is a reliable construction for many years!
We manufacture profiles for wardrobes
Aluminium polishing is the process of using abrasive materials to make the surface a smooth and shiny sheet or profile. It removes oxidation, corrosion or other contaminants that could damage the appearance of your aluminium products.
Grinding is an abrasive grinding process in which a grinding machine is used as a cutting tool, wheel or grinder. In our case, a machine.
Grinding is used to process workpieces that must exhibit high surface quality and high accuracy of shape and size. If your requirements for the profile are exactly the same, then there is no way without grinding.
Metal brushing process This metal brushing process occurs before anodizing the profile.
There are options with different pressure of the brushes on the metal and speed of passage. In some cases, we make several passes with the brushes to get the desired effect.
Features of powder coating We use American IPG paint and Russian paint PROLAK and BECKERS.
Fat catcher OV-0,5/30, volume 30L, wall thickness 5мм.
Minimum quantity for "Widely universal milling machine 67K25PF1" is 1.
The synthetic rope is made of UHMWPE （Ultrahigh molecular weight polyethylene) - polyethylene (ultra high molecular weight) and is as strong as steel, yet very lightweight, wear-resistant and completely safe to use - even if it breaks under stress, severe injury Due to its softness and low weight, it will not cause damage to people and cars.
Minimum quantity for "Synthetic rope (kevlar) Ø14 mm for car winch, Rope" is 1.
The kit includes:
Spacers (material - caprolon) Ø70mm, height 50mm: 12 pcs.Bolts (strength class at least 8.8) Ø12mm x 140mm: 10 pcs.Bolts (strength class at least 8.8) Ø12mm x 170mm: 2 pcs.Washers: 24 pcs.Nuts: 12 pcs.
Minimum quantity for "Kit for lifting a body with a height of 50 mm for the car Mitsubishi Pajero 2 (5 doors)" is 1.
An electrically controlled hydraulic station is designed to generate hydraulic energy and connect one or more hydraulic actuators.
Specifications:
Motor power: 0.55 to 150 kW
Pressure range: about 1 to 1,000 bar
Tank volume: from 1 to 10,000 liters.
Flow rate: 0.1 to 1,000 l/min.
Temperature range: from -45 to + 45°С
Each hydroelectric power station is made to order, depending on the needs and tasks of the customer. The price is determined depending on the technical characteristics of the hydroelectric station.
Minimum quantity for "Electrically controlled hydraulic power plant" is 1.
Minimum quantity for "Сhain cutting machine TC2" is 1.
Minimum quantity for "Rack jack Hi Lift X-Treme cast iron 150cm" is 1.
Minimum quantity for "Protective case 625x420x340 mm on wheels with telescopic handle" is 1.
Minimum quantity for "Protective case 420х327х186 mm" is 1.
Characteristics:
Size 30x30 cmMaterial: steelMetal thickness: 4 mmWeight ~ 1.5 kgThere is a handleThe product is powder-painted, pre-sandblastedSuitable for jacks: Hi-Lift, T Max, Farm Jack, Ermak
Minimum quantity for "Platform for rack and pinion jack (hi-jack) "Platform"" is 1.
Minimum quantity for "Device for lifting the car by the wheel with a Hi-Lift jack" is 1.
Low-pressure check valve. 200 bar.
Minimum quantity for "Protective case 515х415х200 mm" is 1.
Copper expansion coil
Specifications: L-1000 DN10 (nipple G 3/4 - nipple G3/4)
Material: copper.
Forged steel ax A1
Minimum quantity for "Saw blade for a sawmill, diameter from 350 to 610 mm, in assortment" is 1.
Main characteristics
External dimensions, mm: 975x430x165Internal dimensions, mm: 911x367x141Material: plasticBlack color
Minimum quantity for "Protective case 975x430x168 mm" is 1.
External dimensions, mm: 530x355x255Internal dimensions, mmr: 511x294x186Weight: 4.5kgMaterial: plasticBlack colorTwo layers of foam sealant
Minimum quantity for "Protective case 530x355x255 mm on wheels with telescopic handle" is 1.
Защитное стекло для маски сварщика ( покровное стекло) , не является светофильтром!!! Если в нашем магазине вы не нашли нужный Вам размер стекла, обязательно напишите нам в раздел Вопросы. А мы изготовим и добавим этот размер на маркетплейс. Основная задача защитного стекла сварочной маски, защита светофильтра сварочной маски от абразива, брызг, искр и других внешних воздействий. Защитное стекло является быстросменным расходником. Мы изготавливаем как внешние защитные стекла к щитку сварщика, так и внутренние. Материалом является полностью прозрачный ПЭТ-лист толщиной 1 мм.
Minimum quantity for "Protective plate PET glass for welding helmet." is 3000.
Forged steel ax A2
Minimum quantity for "Protective case 330x280x120 mm" is 1.
Minimum quantity for "Body lift kit with 90 mm spacers for Ssang Yong and TagAZ cars - 60 mm" is 1.
Minimum quantity for "Equipment for installation and assembly" is 1.
Minimum quantity for "Rack jack Hi Lift cast iron + steel 150cm Code: HL-604" is 1.
Minimum quantity for "Power wheel arch extensions for VAZ NIVA 3 doors" is 1.
Minimum quantity for "Protective case 512х410х150 mm" is 1.
Minimum quantity for "Protective case 430х380х154 mm" is 1.
Forged steel ax AO-06
Minimum quantity for "Protective case 300x248x212 mm" is 1.
An indication cabinet is equipped with remote light-and-sound signalling and intended to announce to personnel that cylinders in a manifold have to be replaced.
High-pressure check valve. 200 bar.
Minimum quantity for "Protective case 1346x394x165 mm" is 1.
Minimum quantity for "Hacksaw handle" is 10.
External dimensions, mm: 1133x422x165Internal dimensions, mm: 1067x367x144Material: plasticBlack colorWeight, 9 kg
Minimum quantity for "Protective case 1133х422х155 mm" is 1.
Minimum quantity for "Protective case 246x175x77 mm" is 1.
Minimum quantity for "Line for the production of fiberglass reinforcement "Rebars"" is 1.
Minimum quantity for "Protective case 210x167x90 mm" is 1.
Minimum quantity for "Dosing system for washing machines SMART RH PLUS 3 pumps" is 1.
Minimum quantity for "Industrial vacuum cleaner CleanBox-30PRO" is 1.
Minimum quantity for "Dilution system PROMAX 4P S PXS4F04S0000 lever (bottle)" is 1.
Forged steel ax AO
Minimum quantity for "Thread protector NKT-V 73 (Internal)" is 50.
A filling metal hose is designed for filling or transfer of cryogenic products.
Material: stainless steel
Minimum quantity for "PVC suction device length 300 mm" is 1.
Minimum quantity for "Dilution system PROMAX 1P B PXB1F04S0000 button 4 l/min" is 1.
Minimum quantity for "Dosing system for washing machines SMART RH PLUS" is 1.
Minimum quantity for "Dilution system PROMAX 4P B PXB1F04S0000 button 4 l/min" is 1.
Minimum quantity for "Hand pump Vortex ABN-04" is 1.
Minimum quantity for "Protector for tubing thread 73 (Internal)" is 50.
Minimum quantity for "Dosing system for washing machines SMART RP PLUS 4 pumps" is 1.
Minimum quantity for "Dosing system for washing machines SMART RP PLUS 5 pumps" is 1.
Minimum quantity for "Thread protector NKT-V 73 (External)" is 50.
Minimum quantity for "Dry fog generator ElectroThermo Fogger 700W" is 1.
Minimum quantity for "Dosing system for washing machines SMART RP PLUS 3 pumps" is 1.
Minimum quantity for "Dosing system for washing machines SMART RP PLUS" is 1.
Minimum quantity for "Dilution system PROMAX 1P S PXS1F04S0000 lever (for bottle)" is 1.
Minimum quantity for "Hand pump Vortex N-03" is 1.
Minimum quantity for "Industrial vacuum cleaner Complex-70PRO" is 1.
Minimum quantity for "File handle plastic handle for chisels, screwdrivers, awls, etc." is 10.
Minimum quantity for "Dosing system for washing machines SMART RH PLUS 5 pumps" is 1.
Cone of screw wood splitter "Carrot" D70/24Height 165 mm.D 70 mm.D seat 24 mm.The tip on the screw nozzle is hardened.Single thread, left hand.
Minimum quantity for "Cone of screw wood splitter "Carrot" D70/24" is 1.
Cone of screw wood splitter "Carrot" D60/24Height 155 mm.D 60 mm.D seat 24 mm.The tip on the screw nozzle is hardened.Single thread, left hand.
Minimum quantity for "Cone of screw wood splitter "Carrot" D60/24" is 1.
Electric pipe bender-profile bender for profile and round pipes. The machine bends a profile pipe from 15mm to 50mm. The minimum bend diameter is 450mm. Round pipe from 15mm to 500mm.El. motor 1kw. 60 rpm. Remote control. 220W. Oppression ideal exactly without saber and twisting around its axis. The central roller is hardened and knurled (the pipe will not slip).
Minimum quantity for "Electric pipe bender-profile bender ТЭ 40" is 1.
Minimum quantity for "Classic manual dosing pump" is 1.
Minimum quantity for "Protector for tubing thread 73 (Еxternal)" is 50.
Minimum quantity for "Line for the production of fiberglass mesh "KSP"" is 1.
Minimum quantity for "Hand pump adapter" is 1.
Minimum quantity for "Dosing pump model PR-1 / PR-4" is 1.
Minimum quantity for "Elbow dispenser VORTEX" is 1.
Tap driver, designed for manual cutting of internal threads in holes and cylindrical parts. Suitable for clamping taps with M3-M12 threads.
Minimum quantity for "Dosing pump model PR-1" is 1.
